FMA-4104

Click and hold to zoom

Display Type

None LCD

Volumetric Flow Rate, Max

$1,229.00

Item# FMA-4104

QTY

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 6 weeks

Brand
Accuracy	± 1 %
Accuracy Detail	± 1% of FS at calibration temperature and pressure
Altitude Sensitivity	Deviation of up to 1% from stated accuracy, after re-zeroing
Calibration	NIST 10-Point Certificate
Compliance	CE
Data Interface	RS232
Display Type	None
Electrical Output	4 to 20 mA, 0 to 5 Vdc
Enclosure Ratings	Inst. Level II/Poll. Degree II (IEC 60664)
Humidity Range	Up to 70%
Leak Rate Under Vacuum	less than 10^⁻9 cc He/s
Materials, Wetted	316 Stainless Steel, Aluminum, Brass, FKM
Media Compatibility	Air, Gases, Nitrogen, Oxygen
Operating Pressure, Max	500 psi
Operating Pressure, Min	0 psi
Operating Temperature, Max	50 °C
Operating Temperature, Min	5 °C
Output Detail	Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output)
Output Signal	Current, Voltage
Power Consumption	2.4 W
Pressure Coefficient	0.01% FS/psi
Pressure Drop, Max	0.18 psi
Process Connection Size	1/4 in
Process Connection Type	Compression Fitting
Repeatability	± 0.15%
Response Time	2 sec
Response Time Note	600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow
Supply Power Note	Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise
Supply Voltage	11 to 26 Vdc
Switch Rating	30 Vdc, 1A
Switch Type	SPDT NO/NC, Selectable
Temperature Coefficient	0.15% FS/°C
Turndown Ratio	50:1
Volumetric Flow Rate, Max	20 SCCM
Volumetric Flow Rate, Min	0.4 SCCM
See All Specs Show Less