1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
- Home
- See Flow
- See Flow Meters & Sensors
- See Turbine Flow Meters
- NSF/ANSI Certified Turbine Flow Meters
We noticed you are from . Visit your local site for regional offers and live support.
BV1000-2000-3000-Series
NSF/ANSI Certified Turbine Flow Meters
BV1000-2000-3000-Series
From
$
103.62
Show Ratings & Reviews
Rated 5 out of
5
by
Michael Minicozzi from
Turbine Flow Meter, 0.26 to 6.6 GPM, Trogamid, 3/8
I have used multiple iterations of these flow meters are they are reliable and easy to configure for our needs.
Date published: 2022-08-05
Rated 5 out of
5
by
Anonymous from
1/4 inch flow meter
Flow meter works great much better than the previous model pull up resistance is easy to get right
Date published: 2022-03-11
Rated 5 out of
5
by
Samanvith from
As described. Good product
Has been working well and will be ordering more of these
Date published: 2023-11-27
Rated 5 out of
5
by
The extrusion guy from
Excellent little meter for low-flow applications.
A compact, well made, and very precise device. Wiring it up took about 15 minutes, and it integrates easily into any device that can measure square-wave frequency or count pulses. Very satisfied with the devices precision.
Date published: 2023-05-08
Rated 2 out of
5
by
TestEngineer2 from
Not Plug & Play
I purchased this sensor under the assumption that I could connect in to my OMB-DAQ-2408 and read the frequency of pulses through DAQami. Although DAQami supports frequency on counter channels, this feature wasn't available for my device. After spending 10hrs screwing about and downloading DASYlab, I called customer support. They recommended I buy a 500$ signal conditioner. Reminder-- This 125$ sensor also needs an external pull up resistor because it would've been too expensive to integrate inside the device. I understand that Omega does not create these devices or any of the software but it was a very frustrating experience that could've been avoided with a better shop page.
Date published: 2023-01-30
Rated 3 out of
5
by
Anonymous from
Product Ethanol Compatibility
it is good with water but not compatible with ethanol
Date published: 2023-01-20
- y_2025, m_6, d_13, h_7
- bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
- cp_1, bvpage1
- co_hasreviews, tv_0, tr_6
- loc_en_CA, sid_BV1000TRN025A, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
- clientName_omega
- bvseo_sdk, java_sdk, bvseo-4.0.0
- CLOUD, getReviews, 1ms
- REVIEWS, PRODUCT
Do you have any advice on wiring the pull-up resistor with an Arduino? I have tried and can't get my Arduino to read the signal from the brown wire, all I get are zeros. I'm sure I'm doing something wrong but would love any resources you could provide.
Asked by: Plis
Thank you for your inquiry. A customer supplied pull-up resistor of 1.2 ~ 2.2 KOhm, 1/4 Watt between Red & Brown and should be able to have your Arduino sense the pulse.
Answered by: Application Engineer JC
Date published: 2023-10-06
I would like to use a Raspberry Pi to count the pulses, but the Raspberry Pi GPIO uses 3.3 V logic. The data sheet indicates an input voltage range of 5-24 V. What is the amplitude of the output pulses?
Asked by: Gregory B
Thank you for your inquiry! The amplitude of the output will match that of the supply voltage used with the unit. If a 5V supply is used the square wave will reach and amplitude of 5V and then drop to 0V.
Answered by: Application Engineer JM
Date published: 2022-07-25
Can I use BV1000-TRN-025-A for a very low flow ---like 0.5 lpm. What is the resolution or how low a flow rate can it accurately read?
Asked by: Jim_Bek
Thank you for your inquiry. The flow meter can measure that low and the accuracy is +/- 3% of reading which means the value measured, the accuracy is 3% of that number.
Answered by: Applications Engineer JJC
Date published: 2024-08-05
What is the sampling rate?
Asked by: Charles Chip III
Thank you for your inquiry. The sampling rate for this flow meter is instantaneous as a result of the frequency output.
Answered by: Applications Engineer JJC
Date published: 2023-12-12
Are these flow meters chemical resitant?
Asked by: Gera
Thank you for your inquiry. Chemical compatibility is the responsibility of customers to check against the wetted materials of the flow meter to the liquid being measured. If it is not a corrosive liquid, then, it is or will be compatible.
Answered by: Application Engineer JC
Date published: 2023-05-01
What is the IP rating of this device?
Asked by: TMGP
Thank you for your inquiry. Unfortunately, it does not have an IP rating, only for indoor use.
Answered by: Applications Engineer JJC
Date published: 2024-10-03
What is the conversion between the output frequency (Hz) and flow rate (lpm)? I couldn't find it in the datasheet.
Asked by: JasonBayArea
Thank you for your inquiry about the flow meter. There is an equation that directly liniks HZ to flow rate and goes as follows:
f = (Q x K)/60
where f is Hz
Q is the flow rate in gallons per minute
K is the K-factor which is typically in pulses per gallons or pulses per volume determine by the flow meter
Answered by: Application Engineer JC
Date published: 2023-08-23
Do you sell a monitor and/or cataloguer compatible with this flow meter?
Asked by: Alex2022
Thank you for your inquiry about the flow meter. The DPF75 meter will display both flow rate and total volume or the DPF78 meter will display only the flow rate.
Answered by: Application Engineer JC
Date published: 2022-06-17
- y_2025, m_6, d_13, h_7CST
- bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
- cp_1, bvpage1
- co_hasquestionsanswers, tq_9
- loc_en_CA, sid_BV1000TRN025A, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
- clientName_omega
- bvseo_sdk, java_sdk, bvseo-4.0.0
- CLOUD, getContent, 10ms
- QUESTIONS, PRODUCT