1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
- Home
- See Temperature
- See Connectors, Panel Jacks, & Terminal Blocks
- See Panel Mount Connectors
- Miniature Thermocouple Panel Jack Connectors
We noticed you are from . Visit your local site for regional offers and live support.
MPJ
Miniature Thermocouple Panel Jack Connectors
Models In Stock
- Compact Size
- Accepts OMEGA’s as well as all Industry Miniature Male Connectors
- Accessible Terminal Screws
- Color-Coded
MPJ
From
$
C0.00
Models In Stock
Product Overview
- Panel Height 0.32 in
- Panel Length 0.66 in
The MPJ Miniature Panel Jack requires less than half of the panel area required by the Standard Size connectors. A simple push-on clip is all that is required to retain the connector in a rectangular cutout, or the optional MSS snap strip can be used to mount a row. Angled terminal screws allow wiring to be done after panel assembly.
MOUNTING DIMENSIONS
8.1 x 16.7 mm (0.32 x 0.66)'
Cutout Required
14.3 mm (0.56')
Centers Horizontally
23.8 mm (0.94')
Centers Row to Row Minimum.
Read More
Read LessMOUNTING DIMENSIONS
8.1 x 16.7 mm (0.32 x 0.66)'
Cutout Required
14.3 mm (0.56')
Centers Horizontally
23.8 mm (0.94')
Centers Row to Row Minimum.
Accessories
Show Ratings & Reviews
Rated 4 out of
5
by
AMP236 from
What we needed
This is just what we needed for the project to be completed.
Date published: 2016-02-29
Rated 3 out of
5
by
Ho Truong from
Thermocouple connector.
Clip holder too weak. Should not sell this clip holder to customer...
Date published: 2017-05-24
Rated 5 out of
5
by
Flexus electronics from
good, easy to use. 100% recommend
good, easy to use. 100% recommend. for me to use omega is always great quality
Date published: 2025-05-03
Rated 5 out of
5
by
Hannah from
They fit and work just how you would expect
no issues installing and have used in the past with no problems
Date published: 2024-08-19
Rated 5 out of
5
by
Jerry Gaffney from
These work great.
These work great. Easy to install. Fast delivery.
Date published: 2023-05-24
Rated 5 out of
5
by
Compounding from
Review
Good quality and fit as expected. Would recommended and buy again.
Date published: 2022-01-14
Rated 4 out of
5
by
Dkrug from
Jack works great!
Jack works great. I would recommend reducing the size of the cut-out in order to better stabilize the jack when installed. Otherwise it's loose and sloppy.
Date published: 2020-07-08
Rated 4 out of
5
by
rosa2017 from
always great parts to order
Been ordering panels & thermo-couples from Omega for a long time . Great place and always in time
Date published: 2017-11-07
- y_2025, m_6, d_11, h_8
- bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
- cp_1, bvpage1
- co_hasreviews, tv_0, tr_13
- loc_en_US, sid_MPJ-C-F, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
- clientName_omega
- bvseo_sdk, java_sdk, bvseo-4.0.0
- CLOUD, getReviews, 4ms
- REVIEWS, PRODUCT
Hi. I am interested in a 19MJP1-20-(*) with copper connections. What would be the correct part number. Thank you.
Asked by: GerogeA
Thank you for your inquiry. Use 19MJP1-20-U.
Answered by: Application Engineer CB
Date published: 2024-08-19
Do you sell replacement metal clips for the back side of these connectors? We are recycling dozens of these connectors from deconstructed control devices where the clips were inadvertently not saved.
Asked by: Greg25
Thank you for your inquiry. We offer the replacement clips, sold in a pack of 100, see Item# MH-MPJ-100
Answered by: Application Engineer JB
Date published: 2025-05-30
Hello OMEGA, Do you sell a board on which the MPJ-T-F sit (as it shown on the data sheet)?
Asked by: Vera
Thank you for your inquiry. The part number for the aluminum panel is MJP1-06-BLANK https://www.omega.com/en-us/temperature-measurement/temperature-connectors-panels-and-block-assemblies/panel-connectors-and-assemblies/mjp/p/MJP1-06-BLANK
Answered by: Application Engineer CB
Date published: 2023-01-10
Hi We are using the Miniature Panel Jacket omega PN MPJ-K-F, do you have some assembly instructions for it?, which is the recommended torque for the screws?
Asked by: Octaviano
Thank you for the question regarding the MPJ- series jack panels. Unfortunately, we do not have a formal installation procedure for these and or recommended torque figures for the screws. A basic installation recommendation for the panel screws can be found on the MJP data sheet here: https://assets.omega.com/pdf/connectors/jack-panel-assemblies/panel-jack-assemblies/MJP.pdf . This is the recommended set up for installation of the panel itself. The jacks themselves are a clip-in connector and are clipped in by pushing them into the same side as the mounting screws. If using a snap-strip, simple hand-tightening is adequate for the snap-strip into the connectors. Similarly, hand-tightening all the connector screws is adequate and recommended. Our apologies, there are no specific maximum torque ratings for these screws.
Answered by: Jane
Date published: 2023-03-22
what is the difference between MPJ-K-F and MPJ-KI-F? I dont see any difference on the product specs.
Asked by: Anonymous
Thank you for your inquiry. MPJ-KI-F conforms to European IEC color code (green) and MPJ-K-F follows ANSI color code (yellow).
Answered by: Application Engineer JB
Date published: 2020-10-06
MPJ-K-F are these UL Listed components?
Asked by: Mike77
Thank you for your inquiry Mike77. The MPJ series connectors are not UL listed.
Answered by: Application Engineer SP
Date published: 2022-05-13
DOES THE PANEL JACK COME WITH THE FEMALE CONNECTORS OR ARE THEY SOLD SEPARATELY?
Asked by: Anonymous
Thank you for the inquiry. MPJ-K-F is the female connector. If you want to order panel and female connectors as a set please refer to following link;
https://www.omega.com/en-us/sensors-and-sensing-equipment/sensing-accessories/jack-panel-assemblies/p/MJP
Best regards
OMEGA
Answered by: NorwalkAE
Date published: 2022-01-19
Is it possible to get a CAD model of this connector?
Asked by: RobertreboR
Thank you for the inquiry. We do not offer CAD model unfortunately. For more details on dimensions please forward request to TEMP@OMEGA.COM.
Best regards
OMEGA
Answered by: NorwalkAE_RS
Date published: 2023-04-20
- y_2025, m_6, d_11, h_8CST
- bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
- cp_1, bvpage1
- co_hasquestionsanswers, tq_10
- loc_en_US, sid_MPJ-C-F, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
- clientName_omega
- bvseo_sdk, java_sdk, bvseo-4.0.0
- CLOUD, getContent, 8ms
- QUESTIONS, PRODUCT