FMA3107ST

Stainless Steel Mass Flowmeters and Controllers

Click and hold to zoom

Display Type

None LCD

Material Construction Option

Stainless Steel Aluminum

Volumetric Flow Rate, Max

$923.07 / each

Item# FMA3107ST

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 5 weeks

Brand
Accuracy	± 1.5 %
Additional Features 1	Requires 20-micron filter
Display Type	None
Electrical Output	0 to 5 V
Enclosure Ratings	IP10
GrossWeightValue	0.15
Height	3.5 in
Leak Rate Under Vacuum	less than 10^⁻4 cc He/s
Length	1.87 in
Material Construction Option	Stainless Steel
Materials, Wetted	304 Stainless Steel, 316 Stainless Steel, Epoxy, FKM
Media Compatibility	Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Oxygen
Operating Pressure, Max	500 psi
Operating Pressure, Min	0 psi
Operating Temperature, Max	50 °C
Operating Temperature, Min	10 °C
Output Detail	0 to 5 Vdc (2500 Ω minimum)
Output Signal	Voltage
Pressure Coefficient	± 0.02%/psi
Pressure Drop, Max	1 inH₂O
Process Connection Size	1/4 in
Process Connection Type	Compression Fitting
Repeatability	± 0.5%
Response Time	2 sec
Response Time Note	2 seconds (typical) to within ± 2% of actual flow rate from 25 to 100% of full scale
Series ID	FMA3000-Series
Supply Current	100 mA
Supply Voltage	12 to 15 Vdc
Temperature Coefficient	± 0.2%/°C
Turndown Ratio	10:1
Volumetric Flow Rate, Max	2 SLM
Volumetric Flow Rate, Min	2 SCCM, 0.2 SLM
Weight	0.44 lb
Width	1.03 in
Country of Origin	United States
See All Specs Show Less