1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
F3105-3100-W2100-2200
Individually Available Thin Film Platinum RTD Elements
Models In Stock
- Overall Temperature Range -70 to 600°C
- F3100 Series Flat Class A
- W2100 Series Cylindrical
- This Family of Elements Consists of Platinum 100, 200, 400, 500, 1000 and 2000 Ohm RTD's
F3105-3100-W2100-2200
From
$
22.05
Models In Stock
Product Overview
- Temperature Coefficient 0.00385Ω/Ω/°C
- Temperature Sensor Type RTD
OMEGA introduces the OMEGAFILM platinum RTD element—an element achieved by employing construction techniques similar to those used to manufacture miniature electronic integrated circuits. The result: a precision element available in sizes considerably smaller than the head of a match. All this in a rugged, accurate, ceramic encased package! Best of all, OMEGAFILM elements are calibrated to the worldwide accepted DIN 43760 curve (alpha=0.00385), allowing use with standard off-the-shelf instrumentation available from OMEGA and others, both in the United States and abroad.
Accuracy and Specifications:
OMEGAFILM platinum RTD’s are calibrated to the internationally accepted DIN 43760 curve (alpha=0.00385) and meet 0.1% DIN standard tolerance. When you use these tables, please note that the specific operating ranges for elements vary and are listed on their specifications pages.
Applications: Because of their small size and thin, flat packaging, OMEGAFILM sensors greatly extend the field of RTD applications. Series W RTD elements are thin film encased in a cylindrical ceramic package. Series W single cylindrical RTD elements (such as the W2103) lend themselves to encapsulation in short …›' O.D. protection tubes or shallow holes bored in a metal casing . Series W dual RTD elements ( such as the W2202) consist of 2 separate 2 wire thin film RTD elements in a cylindrical ceramic 4 wire package. Series F (such as F3101) are thin film 2 wire RTD elements on a flat ceramic base. These may be taped, cemented or embedded. To obtain accurate representative measurements, good thermal contact between the surface and the element is important. For temporary installations, a compatible temperature-rated heat- conductive compound, such as a heat sink grease can be used.
Note on Assembling Omega 'F' Series RTD Elements to Extension Wires: These RTD elements are made with platinum coated nickel lead wires. Since platinum does not easily wet with most soft solders, we advise that they be spot welded or silver soldered to extension wires when required.
Read More
Accuracy and Specifications:
OMEGAFILM platinum RTD’s are calibrated to the internationally accepted DIN 43760 curve (alpha=0.00385) and meet 0.1% DIN standard tolerance. When you use these tables, please note that the specific operating ranges for elements vary and are listed on their specifications pages.
Applications: Because of their small size and thin, flat packaging, OMEGAFILM sensors greatly extend the field of RTD applications. Series W RTD elements are thin film encased in a cylindrical ceramic package. Series W single cylindrical RTD elements (such as the W2103) lend themselves to encapsulation in short …›' O.D. protection tubes or shallow holes bored in a metal casing . Series W dual RTD elements ( such as the W2202) consist of 2 separate 2 wire thin film RTD elements in a cylindrical ceramic 4 wire package. Series F (such as F3101) are thin film 2 wire RTD elements on a flat ceramic base. These may be taped, cemented or embedded. To obtain accurate representative measurements, good thermal contact between the surface and the element is important. For temporary installations, a compatible temperature-rated heat- conductive compound, such as a heat sink grease can be used.
| Series | 15 mm Lead Length Dimensions in Millimeters (1 mm = 0.03937') | Model No. | Nominal Single or Resistance Dual (ohms) | Temperature Range |
| W | W2102 W2112 W2122 W2132 W2142 W2152 | 1 x 100 1 x 200 1 x 400 1 x 500 1 x 1000 1 x 2000 | -50 to 600°C (-58 to 1112°F) | |
| W | W2202 W2212 W2222 W2232 W2242 | 2 x 100 2 x 200 2 x 400 2 x 500 2 x 1000 | ||
| W | W2103 | 1 x 100 | ||
| W2204 | 2 x 100 | |||
| WS | WS81 | 1 x 100 | -50 to 600°C (58 to 1112°F) |
| Series | 10 mm Lead Length Dimensions in Millimeters (1 mm = 0.03937') | Model No. | Nominal Single or Resistance Dual (ohms) | Temperature Range |
| F | F3101 F3131 F3141 | 1 x 100 1 x 500 1 x 1000 | Max range: -50 to 500°C (-58 to 932°F) however, Class A tolerance applies to -30 to 300°C (-22 to 572°F) | |
| F | F3102 F3132 | 1 x 100 1 x 500 | ||
| F | F3142 (Class B only) | 1 x 1000 | ||
| F | F3105-A F3145 | 1 x 100 1 x 1000 | ||
| F | F3107 | 1 x 100 |
PDFs & Manuals
