MMA5.0KC1P4J5T4A3

0 to 5000 psi, 0.1% to 0.25% Accuracy, Current, 4 to 20 mA 7/16", AS4395/MS33656, M12, -40 to 100°C (-40 to 220 °F)

Click and hold to zoom

Accuracy

± 0.2 % ± 0.05 % ± 0.08 %

Measurement Pressure, Max

5000 psi 1000 psi 1 psi 0.361 psi -30.5 inHg

Item# MMA5.0KC1P4J5T4A3

This item is discontinued.
Please contact Technical Sales Team for assistance.

Brand
ADC Resolution	None
Accuracy	± 0.2 %
Bandwidth	DC to 1 kHz
Burst Pressure	3000 psi
Compensated Temperature, Max	105 °C
Compensated Temperature, Min	-40 °C
Electrical Connection	M12 4 pin Female
Electrical Output	4 to 20 mA
Enclosure Ratings	IP65
Insulation Resistance	100 MΩ @ 50 Vdc
Materials, Wetted	316L Stainless Steel
Measurement Pressure Type	Absolute
Measurement Pressure, Max	5000 psi
Measurement Pressure, Min	0 psi
Media Compatibility	Any, Clean dry air / inert gas, Clean process / cooling water, Corrosive chemicals / acids / bases, Fuel gases, HVAC / room air, Hydraulic fluids, Inert / non-reactive gases, Liquids, Oils / lubricants, Organic solvents, Steam, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids
Operating Temperature, Max	121 °C
Operating Temperature, Min	-45 °C
Output Signal	Current
Pressure Cycles	1 million, minimum
Process Connection Size	7/16 in
Process Connection Type	UNF Male
Proof Pressure	4x Full Scale up to 3000 psi
Response Time	<1 ms
Series ID	MM-Configurable
Shock	50 g, 11 ms half sine, vertical and horizontal axis
Stability	± 0.1%
Stability Note	Long Term Stability (1-Year): ± 0.1% FS typical.
Supply Power Note	9 to 30 Vdc [9 to 20 Vdc above 105°C (229°F)] max loop res Ω = (Vs-9) x 50
Supply Voltage	9 to 30 Vdc
Thermal Effect on Zero error, Max	± 0.5% FS
Vibration	5-2000-5 Hz, 30 minute cycle, Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis
Weight	200 g
See All Specs Show Less