1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
MMA1.0KV10P2C1T3A3P
0 to 1000 psi, <0.1% Accuracy, Voltage, 0 to 10 V 1/4", NPT Male, MIL-26482-I 10-6P, -6 to 60 °C (20 to 140 °F)
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| ADC Resolution | None |
| Accuracy | ± 0.05 % |
| Bandwidth | DC to 1 kHz |
| Burst Pressure | 3000 psi |
| Compensated Temperature, Max | 60 °C |
| Compensated Temperature, Min | -7 °C |
| Electrical Connection | MIL-26482-I 10-6P |
| Electrical Output | 0 to 10 V |
| Enclosure Ratings | IP65 |
| GrossWeightValue | 0.15 |
| Insulation Resistance | 100 MΩ @ 50 Vdc |
| Materials, Wetted | 316L Stainless Steel |
| Mating Connector | MIL-26482-I 10-6S |
| Measurement Pressure Type | Absolute |
| Measurement Pressure, Max | 1000 psi |
| Measurement Pressure, Min | 0 psi |
| Media Compatibility | Any, Clean dry air / inert gas, Clean process / cooling water, Corrosive chemicals / acids / bases, Fuel gases, HVAC / room air, Hydraulic fluids, Inert / non-reactive gases, Liquids, Oils / lubricants, Organic solvents, Steam, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids |
| Operating Temperature, Max | 121 °C |
| Operating Temperature, Min | -45 °C |
| Output Signal | Voltage |
| Pressure Cycles | 1 million, minimum |
| Process Connection Size | 1/4 in |
| Process Connection Type | NPT Male |
| Proof Pressure | 4x Full Scale up to 3000 psi |
| Response Time | <1 ms |
| Series ID | MM-Configurable |
| Shock | 50 g, 11 ms half sine (under test) |
| Span Setting Adjustable Range | ± 10% span |
| Stability | ± 0.1% |
| Stability Note | Long Term Stability (1-Year): ± 0.1% FS typical. |
| Supply Power Note | 15 to 30 Vdc @ 10 mA |
| Supply Voltage | 15 to 30 Vdc |
| Thermal Effect on Zero error, Max | ± 0.5% FS |
| Trim Pot Access | O-ring sealed screws on side cover |
| Vibration | ± 20 g |
| Weight | 285 g |
| Zero Setting Adjustable Range | ± 10% span |
| Zero/Balance Error | ± 0.5% FS typical ± 1 max |
| Zero/Balance Error Note | ± 0.5% FS typical ± 1 max (for ranges ≤2.5 psi ± 1% typ. ± 2% max) |
| See All Specs | |
PDFs & Manuals
Accessories
Show Ratings & Reviews
Rated 5 out of
5
by
Sally from
Transducer works as expected
Signal is stable. Was not clear to me from the data sheet, but the conduit option comes with prepped wire leads.
Date published: 2023-01-31