1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
ACC793-series
High Performance, Top Mount Accelerometers
- Premium Grade
- Intrinsic Safety Certified Options
- Hermetic Design
- ESD Protection UReverse Wiring Protection
ACC793-series
From
$
509.96
Product Overview
- Additional Features 1 Premium Grade Top Mount
- Approvals FM: Class I, II, III, Division I, Groups A, B, C, D, E, F, G; Division II, Groups A, B, C, D, F, G_x000D_ CSA: Class I, Division I, Groups A, B, C, D
- Bandwidth ±5%: 1.5 to 5000 Hz,±10%: 1.0 to 7000 Hz,±3 dB: 0.5 to 15,000 Hz
- Electrical Output 12 Vdc
- Enclosure Material 316L Stainless Steel
- Ground Isolated Case
- Inrush Current 2 to 10 mA
- Linearity Error 0.01
- Mating Connector Amphenol 97-3106A-10SL-4S type
- Measuring Range ±80 g
- Mounting UNF Tapped Hole
- Mounting Note 1/4-28 tapped hole
- Natural frequency 25 kHz
- Noise Calibration Electrical Noise (Equiv. g, Nominal):,Broadband: 2.5 Hz to 25 kHz: 600 µg,Spectral: 10 Hz: 8 µg/=Hz,100 Hz: 5 µg/=Hz,1000 Hz: 5 µg/=Hz
- Operating Temperature, Max 120 °C
- Operating Temperature, Min -50 °C
- Output Resistance 100 Ω
- Seal Options Hermetic to 10^-8 cc/s
- Sensitivity Note Transverse Sensitivity, Max: 5% of axial, Strain Sensitivity: Max 0.0005 g/microstrain
- Supply Voltage 18 to 30 Vdc
- Vibration 500 g peak
- Weight 112 g
The OMEGAROMETERâ„¢ Series accelerometers are designed for industrial vibration measurements. These accelerometers feature a hermetically sealed 316L stainless steel case suitable for harsh environments. The ACC793 is a high performance accelerometer with a top cable exit. FM and CSA intrinsic safety approval is an available option.
PDFs & Manuals
Show Ratings & Reviews
It is not completely clear from the spec sheet how the ACC793 should be wired up. How is it intended for the power to get in, and for the signal to get out, through the same pin? Is there a sample circuit or application note available anywhere?
The ACC793 accelerometer is part of a system consisting of the accelerometer, a cable from the accelerometer (ACC-CB7-10) to an in-line constant current power supply (ACC-PS5). You will also need an output cable with a BNC connector to connect to the device you will be using to read the signal. We do not offer the output cable.
Date published: 2023-09-27
Are the Accelerometers able to be adjusted to a more limited peak g force range? say 10g, or changing the sensitivity of the device from 100mV/g to 500mV/g?
Thank you for your question. Unfortunately, the accelerometers are not able to be adjusted. The sensitivity and hence the g range is fixed. Please contact our Tech Support if you have any future questions we can assist you with.
Date published: 2019-04-12