1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
PX459-030DDUI-EH
± 0.05% Accuracy, 0 to 30 psi Wet/Wet Differential, 4 to 20 mA, 1/4" NPT Male, M12,EH
Choose a Variant
Electrical Connection
Electrical Output
Measurement Pressure, Max
Negative Side differentional compatable fluids or gasses
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.05 % |
| Accuracy Class | < 0.1% |
| Accuracy Detail | (CombinedLinearity,Hysteresis and Repeatability) |
| Additional Features 1 | ± 0.05% Static Accuracy |
| Bandwidth | DC to 1 kHz |
| Cable Length | 2 m |
| Compensated Temperature, Max | 85 °C |
| Compensated Temperature, Min | -29 °C |
| Electrical Connection | M12 4 pin Female |
| Electrical Output | 4 to 20 mA |
| GrossWeightValue | 0.15 |
| Insulation Resistance | 100 MΩ |
| Line/Static Pressure | 500 psi max |
| Loop Resistance, Max | (Vs-9) x 50 Ω |
| Materials, Wetted | 316L Stainless Steel |
| Measurement Pressure Type | Differential |
| Measurement Pressure, Max | 30 psi |
| Measurement Pressure, Min | 0 psi |
| Media Compatibility | Any, Clean dry air / inert gas, Clean process / cooling water, Corrosive chemicals / acids / bases, Fuel gases, HVAC / room air, Hydraulic fluids, Inert / non-reactive gases, Liquids, Oils / lubricants, Organic solvents, Steam, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids |
| Negative Side differentional compatable fluids or gasses | Clean, Dry, Non-ionic gases |
| Operating Temperature, Max | 115 °C |
| Operating Temperature, Min | -45 °C |
| Output Signal | Current |
| Positive Side differential wetted materials | 316L stainless steel |
| Pressure Cycles | 1 million, minimum |
| Process Connection Size | 1/4 in |
| Process Connection Type | NPT Male |
| Proof Pressure | 4x Full Scale up to 3000 psi |
| Proof Pressure Note | 4 times range |
| Response Time | <1 ms |
| Series ID | PX409-DIF |
| Shock | 50 g, 11 ms half-sine |
| Span Setting Adjustable Range | ± 0.5% typical (1% maximum) |
| Stability | ± 0.1% |
| Stability Note | Long Term Stability (1-Year): ± 0.1% FS typical |
| Supply Voltage | 9 to 30 Vdc |
| Vibration | 5-2000-5 Hz, 30 minute cycle,Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis |
| Weight | 200 g |
| Zero/Balance Error | ± 0.5% |
| Zero/Balance Error Note | ± 0.5% typical (1% maximum) |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals
Accessories
Static Pressure Sensors – 4" Insertion Depth – For Manometers & Gages
From $2.55
0 In Stock
Show Ratings & Reviews
Rated 5 out of
5
by
Anonymous from
Just the Best
Since these USB-enabled transducers are performing perfectly in a unit operations lab at the University of Kansas, they are now installed in a new undergrad fluid mechanics lab experiment at the University of Delaware
Date published: 2020-04-30
Rated 5 out of
5
by
Md Fahim Salek from
Accurate Results
The product is very sturdy and provide very precise results. I liked the USB plug and play setting which is very easy to operate.
Date published: 2024-11-03
Rated 5 out of
5
by
Ric T from
Omega has excellent products
This differential works great and does the job!!!!
Date published: 2024-10-28
Rated 3 out of
5
by
John Don from
Does what it needs to do
Works great just wish it was more specific about connector not included.
Date published: 2024-06-14
Rated 5 out of
5
by
Jeff Bryski from
Very satisfied
The item is exactly what I ordered and was received within a week of ordering. 2nd time I ordered from this sight both times I was very satisfied.
Date published: 2024-04-29
Rated 5 out of
5
by
Jeff Bryski from
Recommended
Received the unit sooner than stated. It was brand new and works great. Good price also.
Date published: 2023-09-08
Rated 5 out of
5
by
Steve L from
Excellent Transducer!
I needed a high accuracy transducer for experiments in my lab, and this one is surely getting the job done well. It's easy to set up and is working just as expected. It was also a lot cheaper than similar transducers I found on other sites. All around a good deal.
Date published: 2019-03-18