1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
PX01
High Accuracy, Hermetically Sealed Pressure Transducers
Models In Stock
- 0.05% Linearity
- 5-Point NIST Traceable Calibration Provided
- All Stainless Steel Construction
- Hermetically Sealed Design for Harsh Environments
PX01
From
$
1,017.25
Models In Stock
Product Overview
- Accuracy Class < 0.1%
- Additional Features 1 None
- Burst Pressure 3x Full Scale
- Burst Pressure Note 300% of rated pressure
- Compensated Temperature, Max 71 °C
- Compensated Temperature, Min 16 °C
- Hysteresis 0.05% FSO
- Materials, Wetted 17-4 Stainless Steel
- Mating Connector MIL-26482-I 10-6S
- Pressure, Min 0 bar
- Proof Pressure 150% Full Scale
- Proof Pressure Note 150% of rated pressure
- Repeatability Error ± 0.05% FSO
- Sensing Element 4-active-arm Strain Gauge Bridge
- Sensing Element Note 4-active-arm bridge, using thick-film strain gages in a hermetically sealed chamber
- Shunt Calibration Value Value Specified on calibration sheet
Description
OMEGA's PX01 Series is a high accuracy, amplified voltage output, industrial pressure transducer. All stainless steel construction and a hermetically sealed case makes the PX01 suitable for harsh industrial environments. It is a true high accuracy industrial device. A broad temperature compensated range of 16 to 71°C (60-160°F) and excellent temperature compensation make this transducer very stable with fluctuating temperatures. The PX01 is available in gage, absolute or sealed models as well as PSI or metric ranges. NPT and 7/16-20 O-ring seal fittings are available for industrial and Hydraulic applications.Consult sales for units available with Inconel construction.
Show Ratings & Reviews
Rated 5 out of
5
by
B Mo from
Good working transducer
The transducer was received before the estimated lead time. Great products for a fair price.
Date published: 2024-10-09
Rated 5 out of
5
by
Lori A from
Lead time was long but part looks great!
Works great.....lead time was very long but part was needed.
Date published: 2023-06-29
Can I connect these to a DAQ system?
Yes these pressure transducers can be connect to a DAQ system. They produce a linear analog in mV, mA or VDC representing the level of gas of liquid pressure being measured.
Date published: 2020-06-04
We would like to measure the resistance between two Signal Pins (A and B) and also the resistance between the two Excitation Pins (C and D). What is the nominal resistnace values and will I require a standard input current?
Thank you for your inquiry
for this transducer the resistance is not applicable.
The current would be what is the factor.
That should be above 22 ma.
Date published: 2020-09-25
Does orientation of the transducer affect the accuracy of the readings?
Orientation of this pressure transducer would have a minimum effect on the accuracy.
Date published: 2020-02-15
Can the transducer have a custom cable length? If so, what is the maximum available custom length?
Thank you for your inquiry. The PX01 Series in an older unit. We have newer sensors with better accuracy the most like would also cost less. Suggest your contact us a 1-800-826-6342 and ask for the Pressure group to discuss your requirements.
Date published: 2021-03-23
Can you please explain the maximum temperature compensation? I notice it states the max temperature compensation is at 71°C. What happens to the accuracy of the transducer if I exceed this temperature, say I am running my system at 85°C?
If you remain within Compensated Temperature Range the Zero and Span Thermal Effect will be 0.003% per Degree F change. If you are above the Compensated range the Thermal Effect will be greater. We do not have data for how much the shift would be when operating out of the Compensated Temperature range.
Date published: 2022-10-19
Where is the pdf for these? You used to have one listed.
Dear FrankM, thank you for reaching out, We are trying to get rid of PDF files and make them available on the web now. Here is a link from the older site you can still use though: https://br.omega.com/omegaFiles/pressure/pdf/PX01-I.pdf
https://br.omega.com/omegaFiles/pressure/pdf/PX01-5V.pdf
Date published: 2021-10-03
Is ±0.19 accuracy in BFSL?
Hello,
Yes, that is correct. +/- 0.19 BSFL
Date published: 2020-04-15