1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
FLT93S-1B1A202C4B00000
2.0" Insertion; Heavy Duty Air / Gas Flow Switch
Choose a Variant
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy Detail | •Level/Interface: ± 0.25" [± 6,4 mm] •Temperature: ± 2 ºF [± 1 ºC] |
| Alarm Note | Alarm Application for liquid flow services |
| Conduit Connection | 1 in NPT Female Conduit with Cable |
| Control Output | 2 Alarm |
| Enclosure Material | Aluminum |
| Enclosure Material Note | Polyester powder coated aluminum rated for NEMA Type 4X/IP67 |
| Enclosure Ratings | Hazardous Location Rated |
| Enclosure Ratings Note | Agency approvals for hazardous location Groups B, C, D, E, F, G, and Eex d IIC |
| Identification Tag | 316 Stainless Steel metal tag |
| Insertion Length | 2 in |
| Measurement Pressure Type | Gauge |
| Measurement Pressure, Max | 3500 psi |
| Operating Temperature, Max | 140 °F |
| Operating Temperature, Min | -40 °F |
| Output Signal | Voltage |
| Pressure Note | 3500 psig (241 bar (g)) at 70 F |
| Process Connection Size | 1 in |
| Process Connection Type | NPT Male |
| Relay Output | 6 A @ 115 Vac |
| Repeatability Note | •Switch Point: ± 0.5 % reading •Level/Interface: ± 0.125" [± 3,2 mm] •Temperature: ± 1 ºF [± 0,6 ºC] |
| Response Time | 5-30 seconds |
| Sensor Material | 316L Stainless Steel |
| Sensor Temperature, Max | 350 °F |
| Sensor Temperature, Min | -40 °F |
| Series ID | Series-FLT93 |
| Service Setpoint Range | •Water-based Liquids: 0.01 FPS to 0.5 FPS [0,003 MPS to 0,152 MPS] with 0.75 watt heater;0.01 FPS to 3.0 FPS [0,003 MPS to 0,9 MPS] with 3.0 watt heater •Hydrocarbon-based Liquids: 0.01 FPS to 1.0 FPS [0,003 MPS to 0,3 MPS] with 0.75 watt heater;0.01 FPS to 5.0 FPS [0,003 MPS to 1,5 MPS] with 3.0 watt heater •Air/gas: 0.25 SFPS to 120 SFPS [0.08 NMPS to 37 NMPS] with 0.75 watt heater at standard conditions; 70 °F [21,1 °C], 14.7 psia [1,013 bar (g)] |
| Supply Voltage | 120 to 230 Vac, 24 Vdc |
| Switch Type | Liquid Flow Switch |
| Weight | 8 lb |
| sensor-temperature-max | 350 °F |
| Country of Origin | United States |
| See All Specs | |
Show Ratings & Reviews