Skip to search Skip to main content Skip to navigation

PX309-7.5KGV

All Stainless Steel Transducers - Silicon Technology

4.8

(59)

Click and hold to zoom

Choose a Variant

Electrical Connection

Cable DIN 43650 C (solenoid valve) MIL-26482-I 10-6P M12 4 pin Female

Measurement Pressure Type

Gauge Absolute Compound Gauge Vacuum

Measurement Pressure, Max

7500 psi 1 psi 2 psi 5 psi 15 psi 30 psi 50 psi 100 psi 10000 psi 150 psi 1000 psi 200 psi 2000 psi 300 psi 3000 psi 500 psi 5000 psi

Electrical Output

0 to 10 mV/V 0 to 10 V 0 to 5 V 4 to 20 mA -5 to 5 V -10 to 10 mV/V

See all Models See all accessories

$374.67

Item# PX309-7.5KGV

QTY

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 5 Days

+ Add to Project List

See Specs

Product Specs

<< See all Product Models

Brand
Accuracy	± 0.25 %
Accuracy Class	0.1% to 0.25%
Accuracy Detail	± 0.25% BSL, max (Combined Linearity, Hysteresis and Repeatability) Zero or Span Setting Accuracy: ± 2% FS
Additional Features 1	None
Bandwidth	DC to 1 kHz
Burst Pressure	4x Full Scale
Burst Pressure Note	-15 to 50 psig and 0 to 1000 psia: 4 times rated pressure or 25 psi whichever is greater, 100 to 10,000 psig: 5 times rated pressure
Compensated Temperature, Max	55 °C
Compensated Temperature, Min	0 °C
Compliance	RoHS 2
Electrical Connection	Cable
Electrical Output	0 to 10 mV/V
Enclosure Material	316 Stainless Steel
Enclosure Ratings	IP65
Insulation Resistance	1 MΩ @ 25 Vdc
Measurement Pressure Type	Gauge
Measurement Pressure, Max	7500 psi
Measurement Pressure, Min	0 psi
Operating Temperature, Max	85 °C
Operating Temperature, Min	-40 °C
Output Signal	Millivolt
Pressure Cycles	10 million, minimum
Pressure Note	Pressure Overload: -15 to 50 psig and 0 to 1000 psia: 3 times rated pressure or 20 psi whichever is greater, 100 to 10,000 psig: 2 times rated pressure
Process Connection Size	1/4 in
Process Connection Type	NPT Male
Response Time	<1 ms
Shock	50 g, 11 ms half-sine
Shunt Calibration Value	In vertical direction with fitting down, compound ranges are calibrated for positive pressure output only
Stability	± 0.25%
Stability Note	1-Year Stability: <0.25% FS
Supply Voltage	9 to 30 Vdc
Thermal Effect on Span error, Max	± 2%
Thermal Effect on Zero error, Max	± 2%, ± 2%
Vibration	± 20 g
Weight	154 g
See All Specs Show Less

PDFs & Manuals

PX309_spec View More

View Less

Compliance

View Less

current tab: Accessories
Reviews

Accessories

PT06F10-6S

Environmentally protected connector with 6 female contacts, -55 to 125 °C (-67 to 257 °F) temperature range

$49.21

566 In Stock

QTY

Reviews

Show Ratings & Reviews

4.8

(59)

Rated 1 out of 5 by Will L from Untrustworthy calibrations Faked calibration certificate (again). Claims to have been calibrated to 10,000psi using calibration equipment that will go to only 6,000psi

Date published: 2024-04-13

Rated 2 out of 5 by H3rb3rt from Word of Caution The product performance was great, but there is a major design flaw. The cable connection option has the cable connected to the body by a nut that if loosened and taken off will break the unit. Whereas the PX409 series differential transducer instead does not have this problem, it has a sealed connection that doesn't allow you to break the unit so easily. The reason I was attempting to take the nut off in the first place was because it was loose and the unit was dunked under water for cleaning so I was trying to make sure the unit would dry out fully before supplying power to the transducer.

Date published: 2021-04-16

Rated 4 out of 5 by under pressure from compact and reliable Have purchased several of these transducers over the last 10 years and do not recall ever having to replace one due to failure. I usually get the 319 series and my only complaint is that there is no key on the connector to simplify pin alignment. They are also offered a wide range of pressure ratings.

Date published: 2019-04-04

Rated 5 out of 5 by USCshan from Great and reliable product for Universities Reliable pressure transducer that works great and is easy to install.

Date published: 2024-11-19

Rated 5 out of 5 by Tom Dineen from 0psi to 5,000psi transducer These work great on all of our drill rigs. They're heavy duty enough to work in our harsh environment and still read like new.

Date published: 2024-11-18

Rated 5 out of 5 by jdakgl from Transducer works great! This transducer works great! I have quite of few of these and have always been pleased.

Date published: 2024-11-18

Rated 5 out of 5 by Anonymous from Dependable, reliable, and easy to use. Dependable, reliable, and easy to use. We use on engine Testcells.

Date published: 2024-11-14

Rated 5 out of 5 by Kpellet from Availability is great! Product is always available when I need to place an order. This is super important to us when we have continued issues going on at our facility.

Date published: 2024-11-14

All Stainless Steel Transducers - Silicon Technology Reviews - page 2