1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
DPF700
Fréquencemètre/totalisateur DIN 1/8 6 Chiffres
1/8 DIN 6-Digit Rate Meter/Totalizer- Measures Rate from 0.5 Hz to 30 kHz
- Totalizes Up or Down from -99,999 to 999,999 or Acts as Accumulating Stopwatch
- 6-Digit, 7-Segment LED, 14.2 mm (0.56')
- Sensor Excitation Output
DPF700
Depuis
$
117.00
L'aperçu du produit
- Accuracy ± 0.5 %
- Accuracy Detail ±0.5 LSD Total, 0.01% of the rate ±1.5 LSD
- Additional Features 1 Rate Measurement Technique 1/x
- Control Output Optional
- Cutout Dimensions 3.62 x 1.73 in
- Decimal Selection Autoranging, User Selectable
- Display Color Red
- Display Type LED
- Form factor 1/8 DIN
- Frequency 30 kHz
- Frequency Response Gate Time: 0.30 sec
- Front Panel Dimensions 4.437 x 2.625 in
- Input Note TTL, CMOS, NPN open collector, contact closure and magnetic pickup compatible
- Input Type Frequency
- Memory Non-Volatile Memory
- Mounting Orientation Panel Mount
- Number of Digits 6
- Number of Inputs 1
- Panel Depth 3.6 in
- Pulse Input Note Low Level: 25 mV rms; Max Level: 60 V; Trigger Slope: Selectable by DIP switch
- Setpoint Two, Optional
- Supply Power Type AC
- Weight 1 lb
From Dec 1st 2018, INFCTRA & DPF700 Rate Meter models will be discontinued. As a possible replacement, please check out DPF20 or consult our sales for UL certified replacement for details.
The DPF701 Series rate meter/ totalizer offers user programming via the 5 front-panel keys. Scale factor may be programmed from -99,999 to 999,999 (any decimal point, multiply or divide), while offset may be programmed from -99,999 to 999,999 (any decimal point). Programs are stored in non-volatile memory, with three levels of program lockout for security. Optional features include Hi or Lo set-points for control or alarm, plus RS232 communication. Fixed decimal point or auto-ranging is standard.
The DPF701 Series rate meter/ totalizer offers user programming via the 5 front-panel keys. Scale factor may be programmed from -99,999 to 999,999 (any decimal point, multiply or divide), while offset may be programmed from -99,999 to 999,999 (any decimal point). Programs are stored in non-volatile memory, with three levels of program lockout for security. Optional features include Hi or Lo set-points for control or alarm, plus RS232 communication. Fixed decimal point or auto-ranging is standard.
Afficher les notes et les avis
Rated 4 out of
5
by
erosion researcher from
Easy to set up for rate measurement
I'm using this with a turbine flow sensor (model FTB602B) and with the friendly assistance of the Omega tech support, it was easy to get the two working together.
Date published: 2016-03-19
i have a dpf700 meter with a turbine fan flange pickup that has a K factor of 5.64. what setting should i set on my dpf700 meter?
Thank you for your inquiry! If you are looking to track the flow rate then you will have to go to the scale portion of the menu and enter the scale factor based on the units of measure. The scale factor and further programming information can be found on page 20 of the manual.
Date published: 2022-04-14