1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
PFT-IAN-B111-S
PFT-IAN-B111-S, INSERTION PADDLEWHEEL FLOW SENSOR, 4-20MA OUTPUT, BRASS BODY, 1-1/2" NPT CONNECTION, FKM SEALS, TUNGSTEN-CARBIDE SHAFT, PTFE BEARING
Choose a Variant
Electrical Output
Process Connection Type
Materials
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Compliance | CE |
| Electrical Connection | Cable |
| Electrical Output | 4 to 20 mA |
| Enclosure Ratings | IP67 |
| Linear Flow Rate, Max | 25 ft/s |
| Linear Flow Rate, Min | 1.2 ft/s |
| Linearity | ± 1.0% |
| Materials | Brass |
| Materials, Wetted | 316 Stainless Steel, Brass, FKM, PTFE, Tungsten Carbide |
| Media Compatibility | Water-based fluids |
| Operating Temperature, Max | 212 °F |
| Operating Temperature, Min | -40 °F |
| Output Detail | Analog 4 to 20 mA Transmitter, 4 mA is 0 ft/s to 1.2 ft/s, 20 mA is 25 ft/s |
| Power Consumption | 40 mA |
| Pressure Limits | Up to 400 psi |
| Pressure Limits Note | (27.6 bar) @ 100°F (37.8°C), 325 psig (22.4 bar) @ 212°F (100°C). |
| Process Connection Size | 1 1/2 in |
| Process Connection Type | NPT Male |
| Repeatability | ± 0.5% |
| Sensor Type | Insertion |
| Supply Power Type | DC |
| Supply Voltage | 10 to 35 Vdc |
| Weight | 3 lb |
| Wire Gauge | 22 AWG |
| See All Specs | |
PDFs & Manuals
Drawings
Accessories
Show Ratings & Reviews