1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
TL-WELD-Series
Fine Wire and Thermocouple Welder with Included Accessories
Models In Stock
- Designed for Production of Commercial Grade Thermocouple Junctions
- No Special Skills Needed to Operate
- 120/220 Vac Selectable
- Weld Wires up to 1.1mm(0.043in.) Diameter
TL-WELD-Series
From
$
1,935.00
Models In Stock
Product Overview
- Diameter 9.9 in
- Energy Output, Max 60 J
- Energy Output, Min 0 J
- Height 4.7 in
- Power Consumption max 170 VA
- Ratchet Action false
- Supply Power Note Standard: 110 to 120/ 220 to 250 Vac selectable, 50 to 60 Hz
- Supply Voltage 110 to 120 Vac
- Weight 4 kg
- Welding Capacity Wires up to 1.1 mm (0.043") in diameter
- Width 8.7 in
The Thermocouple welder TL-WELD is designed for sensor manufacturers for the production of commercial grade thermocouple junctions, and for users of large numbers of exposed junction thermocouples such as test and development laboratories where multipoint temperature sensing of test pieces is required. No special skills are needed and most people will be capable of producing quality work with minimal practice.
The instrument can be operated via the front panel or by using the foot-switch provided. In addition to thermocouple work, the TL-WELD welder is used in many other applications involving the joining of wires to each other and to metal surfaces. This model is suitable for welding wires up to 1.1 mm diameter and has an argon gas shield facility. A satisfactory thermocouple junction is produced without using argon, but where argon is available a momentary purge is automatically triggered immediately prior to the weld to give optimum weld integrity.
Read More
The instrument can be operated via the front panel or by using the foot-switch provided. In addition to thermocouple work, the TL-WELD welder is used in many other applications involving the joining of wires to each other and to metal surfaces. This model is suitable for welding wires up to 1.1 mm diameter and has an argon gas shield facility. A satisfactory thermocouple junction is produced without using argon, but where argon is available a momentary purge is automatically triggered immediately prior to the weld to give optimum weld integrity.
PDFs & Manuals
