1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
HX200HR
Remote RH/Temperature Transmitter 4 to 20 mA output only
Choose a Variant
Mounting Orientation
Measurement Type
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 1 °C (± 1.8 °F) |
| Accuracy Detail | ± 1.0°C from -20 to 40°C (-4 to 104°F); ± 3.0°C below -20°C (-4°F) |
| Additional Features 1 | NIST traceable calibration certificate included, Selectable C or F |
| Data Interface | N/A |
| Dew Point Temperature, Max | 40 °C |
| Dew Point Temperature, Min | -60 °C |
| Display Type | 2 line LCD |
| Electrical Output | 4 to 20 mA |
| Filter | Stainless Steel |
| Length | 88.9 mm |
| Measurement Type | Temperature, Humidity |
| Mounting Holes Center Length | 78.7 mm |
| Mounting Orientation | N/A |
| Operating Temperature, Max | 200 °C |
| Output Detail | Single Output: 4 to 20 mA loop powered (relative humidity or dew point) |
| Pressure Limits | Up to 750 psi |
| Pressure Note | Maximum Sensor Pressure Rating |
| Pressure, Min | 0 psi |
| Probe Diameter | 1.27 cm |
| Probe Length | 10.16 cm |
| Process Connection Size | 1/2 in |
| Process Connection Type | NPT Male and Female |
| Relative Humidity | 1 to 95% |
| Resolution | 0.1 |
| Sensor Material | 304 Stainless Steel |
| Supply Power Note | 4 to 20 mA loop powered, 2-wire 24 Vdc (typical) 12 to 28 Vdc |
| Supply Power Type | Loop Powered |
| Supply Voltage | 12 to 28 Vdc |
| Weight | 1.8 kg |
| Width | 63.5 mm |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Dean Friesen from
Excellent product.
Easy to incorporate in our system, operates flawlessly.
Date published: 2017-12-05
Rated 5 out of
5
by
humiditymeasurement from
can be connected to daq
got this for measuring inlet temperature and RH. can be connected to daq
Date published: 2022-09-12
Rated 4 out of
5
by
Fibreman12345 from
Good product
Using 4 to monitor dew point in compressed air system. Using a rs232 to ethernet comverter to pull data into database. Works great.
Improvements to get 5 stars
1. Make the sensor replaceable by adding a plug
2. Replace power plug with a 5 pin m12 so you do not have to drill a hole in the housing to get serial communication out of unit.
Date published: 2018-08-03
Rated 5 out of
5
by
Copper from
works great in extreme environments
This instrument is more accurate than all of the other brands we have tried. It works great even through a high vibration environment where others fail
Date published: 2020-11-12
Rated 5 out of
5
by
rs1022 from
Works Great!
Just finished installing yesterday, easy set up. Being used in Dew Point mode, and switched over via internal dip switched. This unit is loop powered, so it will require a 24vdc separate power source.
Date published: 2018-08-21