1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OMDC-MD-Series
DC Speed Control with Closed Loop Feedback for DC Motors
- Adjustable Min/Max Speed
- Adjustable Accel/Decel
- NEMA 4X (IP66) Rating
- Universal Power Supply, 85-265 Vac
OMDC-MD-Series
From
$
1,260.12
Product Overview
- Electrical Output 0 to 90/180 Vdc
- Input Control Signal 0-5 to 0-24 Vdc
- Operating Temperature, Max 45 °C
- Operating Temperature, Min -10 °C
- Overload Capacity 200% for 1 min
- Supply Voltage 120/240 Vac
- Transducer Type 5 Vdc @ 50 mA
The OMDC-MD Series is a compact, programmable DC speed control with digital closed loop feedback and LED display for DC motors rated to 2 horsepower. An on-board microprocessor with non-volatile memory, coupled with sophisticated internal software, makes the OMDC-MD series speed control the ultimate value in accuracy and control. Programmable parameters include maximum and minimum set speed, decimal points, and operating mode (master or follower).
The OMDC-MD series speed control is simple to operate: set the desired RPM, rate, or time in the large 1/2' LED display by depressing the “Up†and “Down†pushbuttons on the front panel. Settings can be one digit at a time or fast sweep. The OMDC-MD series speed control settings are exact and repeatable. It will precisely control speed to ±1/2 RPM of set speed, long term. No calibrations of the control are necessary.
The OMDC-MD speed control is available in both 1/8 DIN and 1/4 DIN industry standard cutout dimensions, providing easy panel installation. These DC motor controllers can be set to RPM, FPM, GRP, process time, or any other engineering unit for easy operation.
NOTE: Speed feedback is required (encoder). Recommended: OMDC-PU-40E (see below).
PDFs & Manuals
