1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OM-CP-PROCESS101A-160MA
Choose a Variant
Current Measurement Range
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $282.90 |
| 5-9 | $268.76 |
| 10-24 | $263.10 |
| 25-49 | $251.78 |
| 50-99 | $246.12 |
| 100+ | $240.47 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Alarm | Programmable high and low limits; alarm is activated when current reaches or exceeds set limits |
| Baud Rate | 115200 |
| Calibration Accuracy | ±0.05% |
| Calibration Note | Digital calibration through software, automatically recorded within device |
| Conversion Time | 133 ms |
| Current Measurement Range | ± 160 mA |
| Data Interface | USB |
| Electrical Connection | Removable Screw Terminal |
| Frequency Rejection | 50 to 60 Hz |
| Height | 1.4 in |
| Housing Depth | 1.5 in |
| Housing Height | 2.9 in |
| Housing Width | 5.8 in |
| Impedance Input | 1 Ω, ±1% |
| Input Control Signal | ±160 mA |
| Input Voltage | 0 to 2.5 V |
| LED Functionality | Green LED Blinks: 10 second rate to indicate logging 15 second rate to indicate delay start mode;Red LED Blinks: 10 second rate to indicate low battery and/or full memory |
| Length | 0.6 in |
| Materials | Aluminum, ABS |
| Measurement Type | Current |
| Memory | 1,000,000 readings |
| Memory Modes | Yes |
| Memory Note | 1,000,000 readings; software configurable memory wrap 333,000 readings in multiple start/ stop mode |
| Number of Channels | 1 |
| Operating Temperature, Max | 80 °C |
| Operating Temperature, Min | -40 °C |
| Overload Protection | 0.041666666666667 |
| Programmable Functions | Security |
| Real Time Recording | The device may be used with PC to monitor and record data in real-time |
| Relative Humidity | 0 to 95% RH |
| Resolution | 5 µA |
| Sampling Rate Note | 4 Hz to 1 reading every 24 hours |
| Software | XP SP3/Vista/7 and 8 |
| Start Modes | Button Push, Delayed Start, Immediate Start |
| Supply Power | 3.6 V Lithium Battery |
| Supply Power Note | 10 Year Battery Life Typical, at a 15 Minute Reading Rate |
| Supply Power Type | Battery |
| Temperature Coefficient | < ±50 ppm/ºC |
| Time Accuracy | ±1 minute/month (stand alone data logging) |
| Voltage Measurement Range | N/A |
| Weight | 24 g |
| Width | 2.2 in |
| See All Specs | |
Software & Drivers
Show Ratings & Reviews
Rated 5 out of
5
by
Mike Mandell from
Great back up units
These things are great. We use them as a back up to our POE chlorine analysers - Ontario regs require us to take POE chlorine readings every 5 minutes. On rare occasions our SCADA system messes up and fails to record. We have these stand alone units attached directly to our chlorine analysers and the data recorded was able to fill in the gaps and keep us in compliance. The units are easy to use and the software is simple and intuitive, much nicer than the old units we used to use. We use about 15 of these. They also hold a LOT of data, and the batteries are holding up nicely.
Date published: 2022-01-04
Rated 4 out of
5
by
jlaw from
Good little logger
Logger works as specified, need to have better instructions. Tech support was great
Date published: 2021-10-06