1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
TXDIN1600-Series-Tx
DIN Rail Universal Input Transmitter with Push Button User Trim
Models In Stock
- Simple Configuration Via USB Port
- Universal Pt100, Thermocouple, mV, mA Input
- Isolated Input
- Push Button User Trim (TXDIN1610 and TXDIN1620)
TXDIN1600-Series-Tx
From
$
207.00
Models In Stock
Product Overview
- Accuracy ± 0.04 mV, ± 0.008 mA
- Approvals CE, RoHS
- Approvals Note CE tested to BS EN 61326
- Cable Length 2.5 mm
- Electrical Connection Screw Terminal
- Height 17.5 mm
- Input Type Thermocouple, RTD, Voltage, Current
- Isolation 500 Vdc
- Length 90 mm
- Materials Polyimide 6.6
- Mounting DIN Rail Mount
- Number of Inputs 3
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -20 °C
- Output Detail Type: 3-wire voltage output with programmable ranges: 0 to 10, 0 to 5, 2 to 10, 1 to 5, and 0 to 1V. Output Drive: 2 mA driving 5 kΩ @ 10V. User Trim: Raise and lower buttons, active for offset when output is at offset and span, trim lock option
- Output Value Process
- Relative Humidity 10 to 95% RH non-condensing
- Response Time <500 ms
- Response Time Note <500 ms to reach 95% of final value; start up time <3 s
- RTD Accuracy ±0.1 °C
- Serial Number Reverse connection and over-voltage protection, max over voltage current 100 mA
- Shell Color Gray
- Software Windows PC Software
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Thermocouple Accuracy Type K,J,E,N,T: ± 0.1 %, Type R,S: ± 0.5 °C
- Voltage Measurement Range -40 to 75 mV
- Width 17.5 mm
The TXDIN1600 Series is a new generation DIN rail mounted temperature transmitter. It has been designed to accept most common process and temperature sensor inputs and provide the user with a standard two wire 4 to 20 mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the TXDIN1600 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the TXDIN1600 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.
The TXDIN1600 is also provided with user push button trim, allowing trim adjustments at both 4 mA and 20 mA. The user trim function can be locked during configuration if not required. The range led indicates out of range input during normal operation, during user trim it is used to indicate the stage of trim.
Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the TXDIN1600 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the TXDIN1600 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.
The TXDIN1600 is also provided with user push button trim, allowing trim adjustments at both 4 mA and 20 mA. The user trim function can be locked during configuration if not required. The range led indicates out of range input during normal operation, during user trim it is used to indicate the stage of trim.
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Hello, I have a TXDIN1610 with the LED flashing, did not enable the 'trim function' so I am trying to understand why it is flashing? If I disable power and enable again it comes up. Is this power issue, protection mode, etc?
Hi TechMike,
Thank you for the inquiry. LED may be due to out of range condition. Could be process electrical noise. For more assistance please forward request to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2022-05-20