Skip to search Skip to main content Skip to navigation

FMC-5000-Series

Coriolis Mass Flow Meter

(0)

Models In Stock

See Product Overview

FMC-5000-Series

From ^$ 7,026.30

Models In Stock

Shop Models

More Variations Available

See all series options below

Product Overview

Reviews

Show Ratings & Reviews

(0)

Questions & Answers

If i will buy this product, Can I get CO CQ of its??

Asked by: Bang Dinh

Please contact us at PRESSURE@OMEGA.COM For more details about this request

Answered by: application engineer je

Date published: 2020-04-08

What process controller should I use to interpret the signal from the FMC-5201LA to display liquid density and send a 4-20 mA output to an exterior device?

Asked by: deazwe

Thank you for your inquiry! Something like our platinum series devices could be used to fulfill the needs of this application. Please contact us at flow@omega.com so that we can better tailor the instrument to your process.

Answered by: Application Engineer JM

Date published: 2021-08-12

I see that this meter can measure liquids with a little air in them, is that true in the case of other gases? ie. A majority of liquid CO2 with some CO2 bubbles? If not, could you recommend a high accuracy meter that could?

Asked by: JH925

Thank you for your inquiry with the Coriolis flow meter. It is ideal that the media being measure is a single phase, not a mixture and it can affect the accuracy when measuring. All of Omega's flow products are calibrated to measure single phase medias.

Answered by: Application Engineer JC

Date published: 2022-09-19

If we were to use this as a totalizer for batches, is there any built-in totalizing option? or would this have to be done in a plc? and if so, im assuming the pulse output would be something specific like "1 litre per pulse" ? is it adjustable? Thank you

Asked by: Joel_123

Thank you for your inquiry about this flow meter. Yes, it has a totalizer function and can be reset per batch if you wish.

Answered by: Application Engineer JC

Date published: 2023-02-27

what is the minimum to maximum size availability of coriolis flow meter ?

Asked by: manjit

Pipe sizes are: 1/2, 1, 1 1/2, 2, 3, 4, and 6 inches.

Answered by: ASE HPO

Date published: 2020-03-09

FMC-5501LA RS485 A/B are typically A (-) & B (+), however when connecting I had to reverse the signals to communicate. Are the +/- reversed?

Asked by: JamesTX

Videos & Downloads

FMC-5000-Series

Coriolis Mass Flow Meter

If i will buy this product, Can I get CO CQ of its??

What process controller should I use to interpret the signal from the FMC-5201LA to display liquid density and send a 4-20 mA output to an exterior device?

I see that this meter can measure liquids with a little air in them, is that true in the case of other gases? ie. A majority of liquid CO2 with some CO2 bubbles? If not, could you recommend a high accuracy meter that could?

If we were to use this as a totalizer for batches, is there any built-in totalizing option? or would this have to be done in a plc? and if so, im assuming the pulse output would be something specific like &quot;1 litre per pulse&quot; ? is it adjustable? Thank you

what is the minimum to maximum size availability of coriolis flow meter ?

FMC-5501LA RS485 A/B are typically A (-) &amp; B (+), however when connecting I had to reverse the signals to communicate. Are the +/- reversed?

If we were to use this as a totalizer for batches, is there any built-in totalizing option? or would this have to be done in a plc? and if so, im assuming the pulse output would be something specific like "1 litre per pulse" ? is it adjustable? Thank you

FMC-5501LA RS485 A/B are typically A (-) & B (+), however when connecting I had to reverse the signals to communicate. Are the +/- reversed?