1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OM-CP-BRIDGE101A-Series
Compact USB Bridge/Strain Gage Data Logger with Large Storage
Models In Stock
OM-CP-BRIDGE101A-Series
From
$
590.00
Models In Stock
Product Overview
Show Ratings & Reviews
Rated 5 out of
5
by
A product engineer from
Outstanding
Excellent response and outstanding battery life. I am very happy with the performance of this little device.
Date published: 2021-05-20
Does this data logger use it's own voltage to operate the strain gauges? If not is a separate system required to power the gauges, and if so what would you recommend? Thanks in advance
Hello Nick
The Bridge101a provides a reference voltage of 2.5V for strain gauges.
Date published: 2021-05-12
this data logger still needs a bridge to attach to the strain gauge?
Hello George
It is recommended to have a full bridge setup (350 or 1000 ohm) connected to the logger.
Date published: 2022-10-13
I'm looking to measure muscle spasticity in mice. Might you recommend a strain guage?
Thank you for your inquiry
The Omega strain gauges are not rec-amended for animal or human use.
We wouldn't have any data for this application
Hope this was helpful.
Date published: 2020-02-27
How many strain gauges can be connected to this singular data logger?
Thank you for your question. The logger will support a full 350 ohm bridge.
Date published: 2023-10-12
I want to see strain gauge reading in my pc using which data logger its possible. and please tell me what are instruments i want to use to get strain gauge readings in pc.
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2022-02-08
Does the data logger need to be plugged into a computer with the USB cable for the first time using it to turn it on, rather than using the start/stop button? I tried holding the button for 5+ seconds and the green LED light does not turn on.
Hello, thank you for your question. Yes, you would need to connect to the computer for initial setup before logging for the first time. There are different ways you can start the logger including "immediate" or "delay" start. If you want to use the button to start the logger then you would select "manual" start during setup.
Date published: 2021-09-20