1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
CSH5-Series
Stainless Steel Strip Heater Diagonal Terminals
Models In Stock
- A Reliable Heat Source with Seamless Stainless Steel Sheath
- Flat Surface Mounting Installations
- Used in Hundreds of Industrial and Commercial Heating Applications
- Ovens
CSH5-Series
From
$
154.46
Models In Stock
Product Overview
- Applications Dies, Food and Beverage, Food Processing Equipment, Heat and Energy Systems, Heating Equipment, Molds
- Form factor Strip
- Height 0 in
- Current, Max Lead Wire Termination: 10 amp ; Screw Terminations: 10-32UNF—25 amp
- Mounting Slot Size 8 mm x 13 mm
- Number of Mounting Holes 2
- Physical Size Construction Limitations Width:16 mm (5/8") Wide Heaters: +0.000, -0.005";25 mm and 38 mm (1 and 1 1/2") Wide Heaters: +0.000, -0.010"; Thickness: 6 mm (1/4") Thick Heaters: +0.000, –0.005",8 and 10 mm (5/16 and 3/8") Thick Heaters: +0.000, –0.008";[10 mm (3/8") thick heaters have radius corners];Length:Up to 24": ± 1/16";Over 24": ± 1/8"
- Power Density, Max 45 W/in²
- Power Tolerance 5%, -10%
- Resistance Tolerance 10%, -5%
- Special Bushings Size 13 mm x 16 mm
- Termination Terminals parallel on one side
- Voltage, Max 480 Vac
- Voltage Note 480 Vac (when applicable)
Channel Strip Heaters have proven to be extremely efficient and dependable as a heat source for surface heating in hundreds of industrial and commercial applications. The rectangular tube gives full surface contact when used in a milled slot to provide maximum heat transfer area. For surface mounting installations, channel strip heaters must be securely clamped along their entire length to a smooth metal surface. When supported by mounting tabs, the terminal end should be secured firmly. Opposite end should be loose to allow for thermal expansion.
PDFs & Manuals
