1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
17000-18000-80000
Brass or SS Cartridge Heater 2 in NPT
Models In Stock
- Cartridge and Hex Head Immersion (17000 Series)
17000-18000-80000
From
$
287.00
Models In Stock
Product Overview
- Additional Features • Adjustable range from -73 to 316°C (-100 to 600°F) offers wide field of application; • Resolution sensitivity of -0.1°C (0.1°F) offers close control of process • Compact size; lengths under 127 mm (5") and diameters less than 20.6 mm (13⁄16") fit almost any application • Fast response as external metal shell expands or contracts with each temperature change • Sheathing is brass for low range units; stainless steel for higher temperature use • Couplings for hex head and coupling head types are brass with standard pipe threads for mounting. Hex head and coupling head immersion types are screwed directly through the threaded opening in tank or duct or directly into a pipeline containing gas or liquid. The coupling head unit may be directly attached to electrical conduit by means of standard male pipe threads.
- Applications Dies, Heat Sealing, Hot Melt Adhesive Machinery, Labeling, Molds, Packaging, Platens
- Number of Phases 1
- Operating Temperature, Min -73 °C
- Sheath Material 321 Stainless Steel
- Supply Voltage 120/240 Vac
17000/18000 Series
Cartridge type is designed for drilled hole cartridge heating installations in molding presses, platens, rubber vulcanizers, hot plates, etc.
Features
Cartridge type is designed for drilled hole cartridge heating installations in molding presses, platens, rubber vulcanizers, hot plates, etc.
Features
- Adjustable range from -73 to 316°C (-100 to 600°F) offers wide field of application . Resolution sensitivity of - 0.1°C (0.1°F) offers close control of process
- Compact size lengths under 127 mm (5") and diameters less than 20.6 mm (13.16") fit almost any application
- Fast response as external metal shell expands or contracts with each temperature change
- Sheathing is brass for low range units stainless steel for higher temperature use
- Couplings for hex head and coupling head types are brass with standard pipe threads for mounting. Hex head and coupling head immersion types are screwed directly through the threaded opening in tank or duct or directly into a pipeline containing gas or liquid. The coupling head unit may be directly attached to electrical conduit by means of standard male pipe threads.
PDFs & Manuals
Show Ratings & Reviews