1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
RTD-830-Series
Bolt-On RTD Surface Sensors with Aluminum Flag Housing
Models In Stock
- Please refer to replacement part number RTD-831-MTP
RTD-830-Series
From
$
89.14
Models In Stock
Product Overview
- Accuracy Class A
- Accuracy Detail Class A DIN per IEC60751
- Cable Clamp PCLM-MTP
- Cable Length 40 in
- Cable Material Copper
- Electrical Connection 3-Prong Miniature Male Thermocouple Connector
- Insulation PFA
- Mating Connector 3-Prong Miniature Female Thermocouple Connector
- Nominal Resistance 100 Ω
- Number of Wires 3
- Process Temperature, Max 230 °C
- Process Temperature, Min -60 °C
- Screw Size #4
- Sensor Length 0.3125 in
- Sensor Width 0.5 in
- Sheath Material Aluminum
- Wire Gauge 26 AWG
- Wire Type Stranded
The RTD-830 is designed for use as a surface temperature sensor. The aluminum housing allows for fast transfer of heat to/from the sensing element. The housing contains a clearance hole for a #4 mouting screw so the pt100 sensor can be bolted or cemented into place. If bolt mounted, a small amount of Omega's OT-201 High Conductive Paste placed between the housing and surface can improve thermal response. The sensor includes a 100 ohm Class A DIN Platinum element connected to 1 meter (40") of PFA insulated & jacketed cable and a 3-pin miniature connector.
PDFs & Manuals
Accessories
3-Prong Mini flat pin Connector for Thermocouple, RTD and 3-Wire Thermistor
$7.44
846 In Stock
3-Prong Standard Size Round Pin Connector for Thermocouple, RTD and 3-Wire Thermistor
$18.05
316 In Stock
Standard Size Connector Accessories For Ultra-High Temperature Connectors
$2.18
831 In Stock
Show Ratings & Reviews
Why are these RTDs only rated to -60 C? Will they work down to LN2 temps?
Hi Lucasd
The thin film element used is reated to -60 C only.
Best regards
OMEGA
Date published: 2025-04-02
Do the black wires have polarity?
Thank you for your inquiry. RTD's are a resistive temperature sensor, and do not have any polarity designations on the leads. 3-wire RTD's will usually have 1 red lead connected to one side of RTD sensor, and 2 black leads that are compensating leads connected to the other side of sensor and are common to each other. They do not have any polarities. It is more important to follow the wiring diagram for the particular meter you will connect RTD sensor to.
Date published: 2019-11-01
How does accuracy vary with temp? Is +/- 0.15C applicable across the whole -50C to 230C range?
Thank you for your inquiry. The ±0.15°C is only referenced at 0°C. the accuracy decreases as the temperature goes above and below 0°C.
Date published: 2020-02-14
is this available with 2m cables or can you offer extension cables
Thank you for your inquiry. See link https://www.omega.com/en-us/sensors-and-sensing-equipment/temperature/sensors/surface-sensors/rtd-830-series/p/RTD-830-72-SE
Date published: 2020-09-03