1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OS-AO250-801-90
High Temp, Adjustable Output, 80:1 FOV, 90 mm working distance, Fixed IR Sensor with built-in display
Choose a Variant
Electrical Output
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy Detail | Below 1500°C: ± 0.3% of rdg +1°C Above 1500°C: ± 0.4% of rdg +1°C |
| Cable Length | 3 m |
| Control Output | Relay Output with hysteresis 60V DC/42V AC RMS,0.4A |
| Data Interface | USB |
| Display | Yes |
| Electrical Output | 0 to 20 mA, 4 to 20 mA, 0 to 10 Vdc |
| Emissivity, Max | 1 |
| Emissivity, Min | 0.1 |
| Enclosure Ratings | IP65 |
| Field of view | 80:1, 90 mm working distance |
| Housing Height | 33 mm |
| Housing Length | 112.5 mm |
| Housing Material | Stainless Steel |
| Housing Width | 82.5 mm |
| Intrisically Safe | No |
| Isolation | Power supply, *Digital output and Analog output are galvanically isolated * Not applicable for USB 2.0 digital output |
| Laser Operating Distance | 90 mm |
| Laser Output | true |
| Laser Power | <1 mW |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | 0 to 20mA, 4 to 20mA, 0 to 10V, Relay Output with hysteresis 60V DC/42V AC RMS,0.4A |
| Output Signal | Current, Voltage |
| Photodetector Type | InGaAs |
| Power Consumption | 2.5 W |
| Process Temperature, Max | 1800 °C |
| Process Temperature, Min | 350 °C |
| Relative Humidity, Max | 0.95 |
| Relative Humidity, Min | 10% |
| Relay Output | 60 Vdc |
| Relay Output Note | Relay output with hysteresis 60V DC / 42V AC RMS, 0.4A |
| Repeatability | 0.001 |
| Repeatability Note | 0.1% of reading +1°C |
| Response Time | 2 ms |
| Response Time Note | 2 msec adjustable upto 10 sec_x000D_ |
| Sighting Option | Laser |
| Spectral Response, Max | 1.6 μm |
| Spectral Response, Min | 8 μm |
| Storage Temperature, Max | 70 °C |
| Storage Temperature, Min | -20 °C |
| Supply Power Note | 24V DC |
| Supply Voltage | 12 to 28 Vdc |
| Temperature Coefficient | ± 0.055% |
| Temperature Coefficient Note | ± 0.055°C/°C (0.055°F/°F) or ± 0.055 % (whichever is greater) |
| Weight | 600 g |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Calibration
Accessories
This is a air purge unit for the sensor head of the AO250 Models IR Sensors. Strongly recommended in areas where dust may build up on the IR sensor over time.
$400.54
0 In Stock
This is a water cooling jacket accessory with a built in air purge for the AO250 Model IR Sensors. Recommended if ambient temperatures are near or higher then 70 °C (158 °F).
$392.83
1 In Stock
This is a air purge unit for the sensor head of the AO50/50H Model IR Sensors. Strongly recommended in areas where dust may build up on the IR sensor over time.
$221.94
0 In Stock
This is a converter for the OSAO-Series IR sensors to convert signals from RS-232 to RS-485 or RS-485 to RS-232.
$181.25
0 In Stock
This is a communication PCB accessory to provide RS-232/RS-485 connectivity options to the interface of the OSAS-Series IR sensors.
$124.56
2 In Stock
Show Ratings & Reviews
Rated 5 out of
5
by
Shweta Jaroli from
Great Performance
We are satisfied with performance of this pyrometer.
Date published: 2021-09-02
Rated 1 out of
5
by
SSmith from
Does Not Work
The display frequently freezes at a temperature and stops live updating. The power wires going into the device are exposed because the wrapping is too short. They will likely break from moving the device or rip out. The OmegaSoft data collection software will either record to an old file or say that it can't record because a file is active. The "Start" and "Stop" data collection functions do not work.
Date published: 2021-03-26