1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
DPG-101
AC Powered, Digital Pressure Gauge
Models In Stock
- 4-Digit High Resolution LED Digital Display
- All Stainless-Steel Construction
- Gage, Absolute, Compound, and Vacuum Ranges Available
- 0.25% FS Terminal Point Accuracy
DPG-101
From
$
381.67
Models In Stock
Product Overview
- Burst Pressure 4x Full Scale
- Display Size 14 mm (.56 in)
- Display Type LED
- Enclosure Ratings IP65
- Height 145.5 mm
- Length 39 mm
- Materials, Wetted 316 Stainless Steel
- Number of Digits 4
- Operating Temperature, Max 80 °C
- Operating Temperature, Min -30 °C
- Outer Diameter 100 mm
- Process Connection Size 1/4 in
- Process Connection Type NPT Male
- Process Temperature, Max 150 °C
- Process Temperature, Min -40 °C
- Proof Pressure 200% Full Scale
- Relative Humidity ≤90%
- Supply Power Type AC
- Supply Voltage 220 Vac
DPG101 is an electronic digital pressure gauge used to monitor hydraulic fluids. It monitors the pressure via the resistance measured on an isolation membrane. The output signal is amplified by a high-precision, low-temperature drift amplifier. The signal is then fed into a high accuracy A/D converter for the microprocessor to process and then show on the LED display. This flexible, simple to operate digital pressure gauge is safe, reliable, and easy to maintain. The DPG101 is widely used in hydro-power, water, petroleum, chemical, mechanical, hydraulic, and other industries.
Show Ratings & Reviews
Rated 4 out of
5
by
Rob B from
Great, but no instructions.
Nice well made unit, but no instructions on what the buttons on the front do.
Date published: 2021-12-31
It says it has 4-20mA, but there is no connector or wires on the outside of the case. How do I get the 4-20mA out for logging?
There should be 4 wires in the external cable. Red + Power, Yellow - Power, Blue+ 4/20 mA, Green -4/20 mA
Date published: 2020-10-12
According to the "Product Details" the Power Supply for this gauge is 85-240VAC; however, according to the "Manual" M5702/1218, the power supply is 220VAC. Can you please confirm the power supply requirements?
Well, after purchasing this gauge and wiring it for 115VAC it works just fine, soooo.... looks like the product details are correct!
Date published: 2020-10-05
Can it be used to measure steam pressure in the 30 psi/270 degree F?
Thank you for inquiry
This unit will only go to 80 c For this application please see a cooling element for a possible solution?
Date published: 2021-06-28