1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
RTD-805-RTD-806
-50 °C to 230 °C RTD Air Temperature Sensors with Cages
Models In Stock
- For Monitoring of Air and Gas Streams Mounts in Any Orientation
- Exposed Sensing Element Has Fast Response Times in Air
- Available with Stainless Steel or Plastic Housings
- High-Accuracy, 100 Ohm, Class “A” DIN Platinum Element
RTD-805-RTD-806
From
$
190.02
Models In Stock
Product Overview
- Accuracy Class A
- Accuracy Detail High-Accuracy, 100 Ω, Class “A” Per IEC60751 DIN Platinum Element
- Cable Length 40 in
- Cable Material Nickel, Copper
- Insulation PFA
- Nominal Resistance 100 Ω
- Number of Wires 3
- Probe Diameter 0.5 in
- Probe Length 1.25 in
- Process Temperature, Max 230 °C
- Process Temperature, Min -50 °C
- Temperature Sensor Type RTD
- Wire Gauge 26 AWG
- Wire Type Stranded
Description
Omega's Air Temperature RTD sensors. The platinum thin film RTD sensing element is exposed to air flow while being protected from passing debris by a vented housing (available in both plastic and steel). This construction uses a #26 AWG stranded nickel-plated copper, PFA insulated lead wire. This design comes standard with a removable miniature three pin connector.
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
EJKA from
Air Temperature RTD Sensors
good quality product. shipped on time with no hassle.
Date published: 2023-05-01
Is there a schematic diagram that shows with each of the 3 26 AWG goes to on the RTD-805?
Thank you for your inquiry Wade. We do not have a schematic diagram to connect the RTD-805. We would need more information about the device this sensor is being connected to. Please call 1-866-512-7404, ask for Temperature Engineering and speak to one of our temperature engineers over the phone for assistance in connecting this sensor.
Date published: 2022-07-07
I see the steel shield is 13mm, but what is the diameter of the steel stem behind the shield that the wire comes out of?
Hi Dydos,
Thank you for the request. The steel stem diameter is 7/32 inch.
Best regards
OMEGA
Date published: 2023-03-03
How big is the smaller diameter of the sensor? Does the RTD-806-OTP come with the connector separately or attached?
Thank you for your inquiry cnoonan. The probe diameter/housing diameter of RTD-806-OTP is 13 mm (0.5") and the connector comes attached. For any further questions, please email temp@omega.com
Date published: 2022-03-03
Will this plug into my 869C? It has a circular female connection at the top with I think 4 or 5 pinholes.
What are the pressure limits for this device? What is the response time?
Hi Tim1,
Thank you for the inquiry. We do not offer a pressure rating or response time specification for this product.
Best regards
OMEGA
Date published: 2023-10-29
Two questions: 1.. Omega logger OM-DAQXL does not display calendar dates for 2023 or beyond. Is software update to help with this? 2.. To read the Air Temperature RTD-805, data logger pull-down RTD selection does not show RTD 805. Which selection?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2023-06-26