1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OM-VIB-101-Logger
3-Axis USB Vibration/Acceleration Data Logger
Models In Stock
- Mountable Data Logger Uses Three Accelerometers to Precisely Measure Acceleration of Operating Equipment on X, Y and Z Axes
- Stores up to 327,600 Data Points in Flash Memory
- One Button Starts/Stops Data Logging Without a PC
- Plug-and-Play USB 2.0 Interface–No Need for Cables, Cradles or Docks
OM-VIB-101-Logger
From
$
235.32
Models In Stock

Product Overview
- Acceleration Range ± 16 g
- Battery Size and Type 3.6V Li-ion
- Calibration Accuracy Accelerometer : ±0.5 g
- Data Interface USB
- Frequency Response 0 to 60 Hz
- Height 54 mm
- Humidity Range 5 to 95% RH
- LED Indicators Red and Green LEDs Indicate Device Status (Recording, Not Recording, Low Battery, Memory Full)
- Length 113 mm
- Memory 327600 Data Points
- Memory Note 327,600 data points in 16 MB flash memory
- Millivolt Range N/A
- Number of Measurements 3
- Operating Temperature, Max 45 °C
- Operating Temperature, Min 0 °C
- Measurement Pressure, Max 0 psi
- Sampling Rate 20 Hz (20 updates/second)
- Sampling Rate Note 50 ms to 24 hours
- Software Windows XP SP3 / Vista / 7 and 8 (32 and 64 - bit)
- Supply Power Type Battery
- Weight 73.5 g
- Width 32.5 mm
The OM-VIB-101 is ideal for assessing the health and diagnosing performance problems of rotating machinery. Slight changes in the axial accelerations of a motor over time can reveal whether a motor is running efficiently and even indicate whether it may fail in the future. The OM-VIB-101 uses three components to collect and present vibration data:
1) Memory stick-sized USB data logger containing three precision accelerometers
2) Pedestal for mounting the data logger on an operating piece of equipment
3) Powerful Windows®-compatible graphics application. Once the logger has been dismounted, plugging it into a computer’s USB port automatically imports hours of vibration, motion and tilt data to the application.
Read More
1) Memory stick-sized USB data logger containing three precision accelerometers
2) Pedestal for mounting the data logger on an operating piece of equipment
3) Powerful Windows®-compatible graphics application. Once the logger has been dismounted, plugging it into a computer’s USB port automatically imports hours of vibration, motion and tilt data to the application.
PDFs & Manuals
Software & Drivers