Skip to search Skip to main content Skip to navigation

CT7110

Single and Dual Pen Circular Recorder with Digital Display

(0)

Click and hold to zoom

Choose a Variant

Recording Color

Pen 1: Red, Pen 2: Green Pen 1: Red

Number of Relays

N/A 2 4

Control Output

N/A On/Off ON/OFF, PID Control

Supply Voltage

115 Vac

Material Construction Option

Standard

See all Models See all accessories

$4,304.61

Item# CT7110

QTY

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 16 weeks

+ Add to Project List

See Specs

Product Specs

<< See all Product Models

Brand
Alarm modes	Active High Output, Active Low Output, Adjustable
Battery life	up to 5 yr
CMRR	90 dB minimum; 24 Vac maximum for RTD input; 15 Vac maximum for other inputs
Chart Diameter	254 mm
Chart Note	Chart Span: Bottom and top of span, -9999 to 9999 units; Chart Drive: DC Stepper Motor; Chart Drive: Stepper Motor
Chart Speed	0.1 to 999.9 Hours
Control Output	N/A
Current Measurement Range	4 to 20 mA
Cutout Dimensions	321 x 343 mm
Deadband	Recording: 0.3%
Display Note	Digital Displays: 2 possible: 1 per installed pen; (4) 7-segment digits, 14 mm (0.56”) high, red LEDs, automatic (-) positioning, decimal point positioning Keypad: Located on front cover, tactile feedback membrane keys, Display/Record Filter: 1 to 20 Scans. Alarm Display: 2 alarm indications possible per pen; ALRM1 and ALRM2; red LEDs; single ALRM indication provided for controller pens
Display Type	LED
EMC Standard	IEC 61000-4-2
Filter	1 to 20 Scans
Height	335 mm
LED Indicators	LED indicates Out 1, Out 2, Man, Ramp, Soak, Seg 1 through Seg 6, process units as applicable
Length	92 mm
Material Construction Option	Standard
Materials	Plexiglass
Measurement Range Note	Thermocouple: J: 0 to 760°C, K: 0 to 1360°C, T: -220 to 400°C, E: 0 to 750°C, N: 0 to 1300°C, R: 200 to 1650°C, S: 200 to 1650°C, B: 200 to 1800°C, C: 200 to 2300°C RTD: -140 to 400°C Current: 4 to 20 mA Voltage: 0 to 25 mV, 0 to 50 mV, 10 to 50 mV, 0 to 5 V, 1 to 5 V
Measurement Type	Thermocouple, RTD, Current, Voltage
NMRR	85 db @ 60 Hz or greater
Number of Channels	2
Number of Relays	N/A
Operating Temperature, Max	55 °C
Operating Temperature, Min	0 °C
Pen Type	Disposable Fiber tip
Power Consumption	25 VA
RTD Type	100 Ω Pt sensor; α= 0.00385
Recording Color	Pen 1: Red, Pen 2: Green
Relative Humidity	0 to 90% RH, non-condensing
Resolution	Pen Resolution: 0.15%
Response Time	20 sec
Sampling Rate	1 Scan/sec
Sensor Break Detection	Sensor Fault Detection: Displays “Hi” or “Lo” process input (10% above or below range) and sensor break “SnSr”; pen action on error condition is user configurable to 0 or 100% of chart span; on/off outputs go “off”; proportional outputs go to user-defined value from 0 to 100%
Standard Limits of Error	Error Limit: Measurement Error Limit: Thermocouple Types J, K, T, E, N and RTD: ±0.25% of reading + 1° @ 25°C (77°F); Type R, S, B, C Thermocouples: ±0.25% of span @ 25°C (77°F); mVdc and Vdc: ±0.25% of scaled span plus 1 least-significant digit Ambient Temperature Error Limit: 0.01% of span per °C (1.8°F) deviation from 25°C (77°F) Process Value Output Error Limit: ±0.5% of span Record Error Limit: ±0.5% of chart span or better, typically; ±1.0% of chart span maximum; Calibration Shift: Self-compensating for ambient temperature; all calibration values are stored in memory; Process Value Output Error Limit: ±0.5%; Record Error Limit: ±0.5%
Storage Temperature, Max	65 °C
Storage Temperature, Min	-40 °C
Supply Power Note	115 Vac ±10%, 50/60 Hz
Supply Power Type	AC
Supply Voltage	115 Vac
Switch Rating	2 A @ 115 Vac, 1 A @ 230 Vac
Switch Type	SPST
Temperature Measurement Range	J: 0 to 760°C, K: 0 to 1360°C, T: -220 to 400°C, E: 0 to 750°C, N: 0 to 1300°C, R: 200 to 1650°C, S: 200 to 1650°C, B: 200 to 1800°C, C: 200 to 2300°C, RTD: -140 to 400°C
Thermocouple Type	J, K, T, R, S, N, E, B, C
Vibration	0.5 to 100 Hz @ 0.2 g
Voltage Measurement Range	0 to 25 mV, 0 to 50 mV, 10 to 50 mV, 0 to 5 V, 1 to 5 V
Weight	9.1 kg
Width	384 mm
Wire Code Option	2- or 3- Wire
See All Specs Show Less