1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
DP41-Series
1/8 DIN High Performance Temperature, Process and Strain Meter
Models In Stock
DP41-Series
From
$
855.69
Models In Stock
Product Overview
Accessories
accessories
Economical bench stand
$63.00
0 In Stock
cables
signal conditioners
Show Ratings & Reviews
Rated 1 out of
5
by
15YearsOfExperiance from
Garbage
The scaling is a "unique" process, wherein a simple zero point and span point will not be sufficient, and a scaling and offset coefficient will need to be altered for correct span value and zero/null reading respectively. This isn't inline with industry standards. Where most other instrument manufactures have implemented such a basic function as two point linearity, the DP-41 requires extra steps. It has a two point linearity feature, however it simply doesn't work. After designating a zero and span value, and returning to operation mode, the applied values from adjustment will not match the meter display. This was confirmed in calibration lab on a calibrated bench meter (34401A) and a power supply (6115A).
What's more, if the 2 point scaling procedure is done multiple times, the parameters will change by a large margin (we saw about a 350% error between scaling procedures, performing the operation 20 times). This isn't random; the error occurs every other time. Again, two point scaling is a very basic function of most instrumentation that the DP-41 fails at accomplishing.
Date published: 2023-02-02
Rated 5 out of
5
by
DLR57 from
Quality parts
Thank you for the quick shipping of this item and Omega always provide reliable parts needed for our test area.
Date published: 2021-04-15
I have a DP41-E connected to an LVDT. How would I connect a computer to it and record values at set intervals? If I add a RS-232/RS-485 Communications board is there a software that then records for me?
There is no specific software package offered for the serial communication option on the DP41 Series display. There is separate user's manual available for the user's manual that would aid you in writing a program for the serial communication. Please contact us at pressure@dwyeromega.com for access to this manual
Date published: 2024-06-12
For the DP41-E, does the automatic tare feature adjust the zero offset numbers (so as to automatically adjust the zero offset), or does it only change the display to zero? There is a sensor I am working with that tends to drift thermally through the day.
Thank you for your inquiry
When you use the tare function it tares only the number that is displayed at the time if it drifts afterwards you would need to tare again.
Hope this was helpful.
Date published: 2022-10-19
I have DP41-U Model, is DP41-U-A the same? Are they compatible or what is the difference from DP41-U to DP41-U-A?
Thank you for your inquiry. DP41-U-A has an analog voltage/current retransmission output and DP41-U does not.
Date published: 2023-07-10
On the DP41-E-A, P9 connector. Is it sold separately? What is the part number for P9.
Thank you for your inquire
The DP41 comes with all conectors.
The replacement part numbers is DP40-CONN-P39 ,
Date published: 2022-10-19
I'm using a DP41-S with a LCMGD20KN load cell and I'm not able to calibrate, I followed the complete manual step by step but I couldn't help me or give any tips.
Please contact our Pressure Department at 1-888-826-6342 or pressure@omega.com regarding this request.
Date published: 2024-12-31
Does the DP41-E-DC-A Model have the option for multipoint scale and offset configurations (MP.SC.OF)? If not, why. I cant find anything in the manual and I have a discontinued model DP41-B and that manual does have a MP.SC.OF options
The DP41-E and DP41-S displays do not have a multipoint scaling feature. Only the obsolete DP41-B and DP41-W displays had this feature
Date published: 2023-02-19
RoHS 2015/863 - View Certificate
CE Approved
UKCA