1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
CNITH-I16D33-5-DC
iSeries Humidity and Temperature Controller
Choose a Variant
Data Interface
Control Output
Display Type
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| A/D Conversion | A/D Conversion: 12-bit RH and 14-bit temp Reading,Rate: 2 samples per sec max,Digital Filter: Programmable Decimal Selection: None, 0.1 for temperature and humidity |
| Additional Features 1 | 5 inch Probe |
| Control Action | Action: Reverse (heat) or direct (cool) |
| Control Output | 2 SPDT Relay |
| Data Interface | N/A |
| Display Size | 10.2 mm (0.40 in) |
| Display Type | 4 Digit LED |
| Display Type Note | Display: 4-digit, 9-segment LED i32, i16D, i8DV: 10.2 mm (0.40") i8: 21 mm (0.83") i8DH: 10.2 mm (0.40") and 21 mm (0.83") RED, GREEN and AMBER programmable colors for process variable, setpoint and temp units |
| Enclosure Ratings | IP65, NEMA Type 4X |
| Form factor | 1/16 DIN |
| GrossWeightValue | 1.56 |
| Input Note | Input Accuracy/Range @ 25C - Non-condensing: ±3% for 10 to 90%; ±3.5% for 5 to 10% and 90 to 95% ±4% for 0 to 5% and 95 to 100% Hysteresis: ±1% RH Non-linearity: ±3% Temperature Accuracy/Range* ±0.5°C for 5° to 45°C (±1°F for 41 to 113°F); up to ±1.5°C for -40° to 5°C and 45° to 124°C (up to ±2.7°F for -40° to 41°F and 113° to 255°F) Resolution: 0.1%, 12bit for RH; 0.1°C, 14 bit for temperature Response Time: 8 seconds, tau 63% for RH; 5 to 30 seconds, tau 63% for temperature *Note: Extended temperature range is for industrial probe only, the controller’s operating temperature is 0 to 50°C. |
| Input Type | Digital |
| Measurement Type | Temperature, Humidity |
| Number of Inputs | 2 |
| Number of Outputs | 2 |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | 2 solid state relays (SSR’s): 0.5 A @ 120/240 Vac continuous |
| Probe Dimensions Note | 127 mm (5") probe for iTH with 3 m (10') cable |
| Probe Length | 127 mm |
| Ramp and Soak | Single Ramp & Soak |
| Relative Humidity | 90% RH non-condensing |
| Samples,Max | 2/sec |
| Series ID | CNITH-Series |
| Supply Power Note | Low voltage power option: 20 to 36 Vdc, 24 Vac ±10%; 12 to 36 Vdc, 24 Vac ±10% for iTH-32 |
| Supply Power Type | DC |
| Supply Voltage | 20 to 36 Vdc |
| Country of Origin | Mexico |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Accessories
sensors
Show Ratings & Reviews
Rated 5 out of
5
by
LenBH from
Easy install and setup
Bought this to control a vacuum pump. Worked great. Easy setup. Panel mount accessories make for easy install.
Date published: 2016-03-31