Skip to search Skip to main content Skip to navigation

India +91 8925807296 | Welcome to our new website, found an issue or bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

MP1-MP2

Heavy-Duty Magnetic Mount Thermocouples for Ferrous Metal Surfaces

重負荷用磁気マウント熱電対(鉄系金属表面用)
  • 鉄系材料の表面温度を測定
  • スプリングマウント熱電対
  • 単一または二重の53ニュートン(12ポンド)引張磁石
  • J、K、E、T校正
MP1-MP2
From
重負荷用磁気マウント熱電対(鉄系金属表面用) MP1-MP2 MP1-MP2
loading all models
Product Overview
  • カラーコード標準 ANSI
  • プロセス温度(最高) 370 °C
  • プロセス温度(最低) 0 °C
  • シリーズID MP1-MP2

Supported Applications

The Omega MP Series consists of heavy-duty magnetic mount thermocouples designed to measure the surface temperature of ferrous materials. These probes feature a spring-mounted sensor element that ensures consistent contact with the target surface.

Operating Conditions & Performance

The series is available in Type J, K, E, and T calibrations. Standard lead wires are 1 m (40") SS overbraided glass insulated wire; PFA insulated wire is an optional configuration. The probes utilize a subminiature male connector with a write-on window and include a cable clamp.

Magnet pull force specifications for the series:

  • MP1: Single magnet, 53 Newton (12 lb) pull
  • MP2: Dual magnets, 53 Newton (12 lb) pull per magnet

Configuration Options

The MP Series offers configurable options for sensor grounding and lead wire insulation to accommodate specific installation needs.

  • Sensor Grounding: Standard grounded configuration; ungrounded option available by adding the "-UNGROUND" suffix (additional cost).
  • Lead Wire Insulation: Standard SS overbraid glass insulated wire. Optional PFA insulated lead wires are ordered by adding the "-TT" suffix to the model number.

The series includes two primary housing configurations with distinct dimensions as documented in the specifications table:

  • MP1 (Single-magnet probe): 25 H x 38 W x 25 mm D (1.0 x 1.5 x 1.0")
  • MP2 (Dual-magnet probe with handle): 108 H x 64 W x 25 mm D (4.3 x 2.5 x 1.5")

The model number format follows the pattern MP1-(-*)-36-SMPW-M or MP2-(-*)-36-SMPW-M, where "*" specifies the calibration type (J, K, E, or T).

Key Product Differences

The primary distinction between models in this series is the magnet configuration and physical dimensions:

  • Model MP1: A single-magnet probe designed for compact surface measurements.
  • Model MP2: A dual-magnet probe featuring a handle, providing increased stability or reach depending on application geometry.

The series documentation notes that smaller magnetic mount thermocouples are available as separate models (88401 and 88402).

en-IN
en_SG
Save Configuration