Skip to search Skip to main content Skip to navigation

Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
  1. Home
  2. See Temperature
  3. See Thermocouples
  4. See Portable Surface Thermocouples
  5. Heavy Duty Handheld Surface Probes
We noticed you are in , please visit your local site by clicking the below link for regional offers and support.
Stay here.
Go to the site >
Heavy Duty Handheld Surface Probes
Click and hold to zoom

SP-SURF-PROBES

Heavy Duty Handheld Surface Probes

  • Each Probe Comes Standard with SMP Miniature Connector on End of 6 ft. Lead Wire
  • Six Rugged Probe Styles Available in J, K and E Calibrations
  • 1.8 m (6 Ft) PFA-Coated 22 AWG Stranded Lead Wires
  • Beaded Wire Probe Has Glass-on-Glass Insulation with Stainless Steel Overbraid
SP-SURF-PROBES
From SGD 273.40
Shop Models
1 Variations available
See all series options below
SP-SURF-PROBESData Sheet

Data Sheet
Heavy Duty Handheld Surface Probes SP-SURF-PROBES SP-SURF-PROBES
Product Overview
  • Cable Length 6 ft
  • Color Code Standard ANSI
  • Electrical Connection Miniature Male Thermocouple Connector
  • Insulation PFA
  • Overbraiding Type Stainless Steel
  • Process Temperature, Min 0 °C
  • Series ID SP-SURF-PROBES
  • Sheath Material 304 Stainless Steel
  • Temperature Sensor Type Thermocouple
  • Wire Gauge 22 AWG

Supported Applications

The Omega Heavy Duty Handheld Surface Probes (Series SP-SURF-PROBES) are temperature measurement probes designed for portable surface and general-purpose sensing. The series provides rugged handheld solutions featuring SMPW miniature connectors, intended for use with compatible thermocouple instruments.

Operating Conditions & Performance

The probe assembly utilizes 1.8 m (6') PFA-coated lead wires constructed from 22 AWG stranded conductors with glass-on-glass insulation and a stainless steel overbraid. The sensor tip diameter is specified as 3.2 mm (0.13") OD for the standard configurations.

Configuration Options

The series supports six distinct probe styles to address different access requirements, available in Type J, K, and E thermocouple calibrations:

  • Curved Surface Probe (SP-RL): Designed for curved surface applications.
  • General Purpose Probe (SP-GP): Standard handheld configuration.
  • Beaded Wire Probe (SP-BW): Exposed beaded wire element style.
  • Right Angle Probe (SP-RA): 90-degree orientation for specific access needs.
  • Surface Probe (SP-SP): Flat surface contact design.
  • Needle Probe (SP-NP): Fine-point configuration.

Optional configurations include extension handles with black anodized aluminum grips in 100, 300, or 600 mm (4, 12, or 24") lengths. Specific variants are available trimmed to a lead resistance of 3.85 Ω for use with analog pyrometers.

Key Product Differences

Model numbers follow the format SP-[PROBE_TYPE]-[CALIBRATION]-6, where [PROBE_TYPE] identifies the style (RL, GP, BW, RA, SP, NP) and [CALIBRATION] specifies J, K, or E. The standard connector is an SMPW Miniature Connector; for analog pyrometer compatibility, the '6' suffix in the model number changes to '3.85'. Extension handles are ordered separately as SP-EH-4 (100 mm), SP-EH-12 (300 mm), or SP-EH-24 (600 mm).

en-NL
en_SG
Save Configuration