Passer à la recherche Passer au contenu principal Passer à la navigation

Besoin d'aide? Appelez-nous: 1-800-663-4209

Nous avons remarqué que vous êtes dans , veuillez visiter votre site local en cliquant sur le lien ci-dessous pour des offres et un support régionaux.

PHE735710-555110-Series

Électrodes pH et ORP 1/2 po MNPT à usage général

General Purpose 1/2 in MNPT pH and ORP Electrodes
Modèles en stock
  • Durée de conservation de 16 mois
  • Compatibilité universelle - Fonctionne avec tous les contrôleurs de pH courants
  • Applications
    • Approvisionnement en eau potable
    • Tours de refroidissement
    • Aquariums d'eau douce et d'eau salée
    • Eaux usées traitées secondairement
PHE735710-555110-Series
À partir de SGD € 329,47
Modèles en stock
General Purpose 1/2 in MNPT pH and ORP Electrodes PHE735710-555110-Series PHE735710-555110-Series
loading all models
Aperçu du produit
  • Précision ± 0.1 %
  • Longueur du câble 10 ft
  • Diamètre 0 mm
  • Dérive <2 mV par semaine
  • Connexion électrique N/A
  • Matériau du boîtier Acier inoxydable 316 ; PPS ; PTFE ; Verre
  • Impédance 80 MΩ
  • Longueur 0 mm
  • Pression, max 100 psig, 100 psi
  • Pression, min 0 psig, 0 psi
  • Taille du raccordement au process 1/2 po
  • Type de raccordement au process NPT mâle
  • Température maximale du processus 80 °C
  • Température minimale du processus 0 °C
  • Cellule de référence Jonction unique, KCl/AgCl
  • Junction de référence PTFE poreux
  • Temps de réponse 95 % de la lecture en 10 s
  • ID de série PHE735710-555110-Series

Supported Applications

The Omega PHE735710-555110 series comprises general purpose pH and ORP electrodes designed for liquid analysis in potable water supplies, cooling towers, fresh and salt water aquariums, and secondary treated waste water. The product overview identifies the series as suitable for clean water applications, with specific models engineered to resist electrode poisoning solutions.

Operating Conditions & Performance

The PHE-7357-10-(*) and PHE-5551-10-(*) pH sensors operate within a measurement range of 0 to 14 pH. Standard process temperature ratings cover 0 to 80°C (32 to 176°F), while high-temperature versions are rated for service up to 110°C (32 to 230°F). The series achieves an accuracy of ±0.1% over full range and provides a response time where the sensor reaches 95% of reading in 10 seconds.

Pressure ratings extend from 0 to 100 psig. Wetted materials include PPS, PTFE, and 316 SS. The electrodes feature a porous PTFE liquid junction and a large reference electrolyte reservoir designed for long life. Protective lobes are included on the sensor body to prevent breakage.

Configuration Options

The series offers configurable options across pH sensing, ORP measurement, temperature compensation, and specialized chemical resistance:

  • Sensor Types: General purpose pH sensors (PHE-7357-10-(*)), general purpose pH with solution ground (PHE-5551-10-*), and ORP probes for clean water (ORE-7357-10, ORE-5551-10).
  • Process Connection: ½ MNPT.
  • Housing Materials: PPS housing is standard on the PHE-5551-10 series; this double-junction construction includes a solution ground and offers high resistance to electrode poisoning solutions.
  • Cable Lengths: Standard configuration comes complete with 3 m (10') cable. Non-standard cable lengths are available for additional cost.
  • ATC Options: The PHE-5551-10-(*) model accepts ATC sensor options: -PT100 (100 Ω Pt RTD) or -PT1K (1000 Ω Pt RTD).
  • Suffix Codes: Available for additional cost are the -HF suffix for HF/Fluoride resistance and the -HT suffix indicating a high-temperature reference cell, which is standard on PHE/ORE-5551 models.

Key Product Differences

The series distinguishes between general purpose pH sensors (PHE-7357-10) and those with solution ground construction in a robust PPS housing (PHE-5551). The ORE models provide ORP measurement capabilities for clean water. High temperature service is supported by the -HT option or standard on 5551 series, recommended when temperatures exceed 80°C (176°F).

Storage instructions specify that electrodes must be kept moist in a potassium chloride solution provided in a soaker bottle or rubber boot; pH buffer 4.0 or 7.0 may be used if the original solution is lost. Distilled or deionized water should not be used for storage as it reduces electrode lifespan.

fr-CA
en_SG
Enregistrer la configuration