Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
UWPC-2-NEMA-Series
UW Series Wireless NEMA 4X Voltage & Current Transmitter
- Convert Process Signal to Wireless
- Accepts 0 to 1V, 0 to 5V, 0 to 10V and 4 to 20 mA Signals
- Industrial NEMA 4X (IP65) Enclosure
- Free Software for Monitoring, Recording, and Data Logging Included
UWPC-2-NEMA-Series
From
€
715,33
Product Overview
- Accuracy ± 0.04 %
- Battery life up to 3 yr
- Data Interface Wireless, USB
- Electrical Output N/A
- Enclosure Ratings IP65, NEMA Type 4X
- Form factor Wall Mount
- Height 3.23 in
- Input Range 0 to 10 Vdc
- Input Range Note Voltage/Current: 0 to 1 Vdc, 0 to 5 Vdc, 0 to 10 Vdc or 4 to 20 mA
- Input Type N/A
- Materials Polycarbonate
- Number of Channels 1
- Sensor Type Process
- Software Windows® 2000, XP, or Vista operating system
- Supply Power Note 3.6V lithium battery (included); user replaceable
- Supply Power Type Battery
- Weight 9.6 oz
- Width 3.15 in
The new UWPC wireless process transmitter converts standard process signals (0 to 1V, 0 to 5V, 0 to 10V and 4 to 20 mA) into a wireless signal that can be transmitted up to 120 m (400'), eliminating the need for wiring runs in a variety of environments. The wireless transmitter is housed in a NEMA 4X (IP65) enclosure, providing water and dust protection. The UWPC transmits data at preset intervals, selectable from 2 to 120 seconds. Transmitted data includes the sensor reading, along with RF signal strength and battery status.
The UWPC is compatible with the UWTC-REC family of wireless receivers, which can accept signals from up to 48 wireless transmitters, and display them on a PC. Receivers are available with optional display and analog output. An analog output can be used to interface with a process controller, PLC or data acquisition device. Each unit includes free software that converts your PC into a monitor, chart recorder or data logger. Readings can be saved and later printed or exported to a spreadsheet file.
Wireless Receivers
UWTC-REC1_2 UWTC-REC1: 48-channel wireless receiver with USB
UWTC-REC1_2 UWTC-REC2: 48-channel wireless receiver with USB and single analog output
UWTC-REC4 UWTC-REC4: 48-channel DIN rail mount wireless receiver with USB and four analog output signals
The UWPC is compatible with the UWTC-REC family of wireless receivers, which can accept signals from up to 48 wireless transmitters, and display them on a PC. Receivers are available with optional display and analog output. An analog output can be used to interface with a process controller, PLC or data acquisition device. Each unit includes free software that converts your PC into a monitor, chart recorder or data logger. Readings can be saved and later printed or exported to a spreadsheet file.
Wireless Receivers
UWTC-REC1_2 UWTC-REC1: 48-channel wireless receiver with USB
UWTC-REC1_2 UWTC-REC2: 48-channel wireless receiver with USB and single analog output
UWTC-REC4 UWTC-REC4: 48-channel DIN rail mount wireless receiver with USB and four analog output signals
PDFs & Manuals
Software & Drivers
