Skip to search Skip to main content Skip to navigation

FMA5516A-ST

Economical Gas Mass Controllers With or Without Integral Display

Click and hold to zoom

Choose a Variant

Accuracy

± 1 % ± 1.5 %

Display Type

LCD None

Material Construction Option

Stainless steel Body Aluminum and Brass Body

Volumetric Flow Rate, Max

2 SLM 10 SCCM 20 SCCM 50 SCCM 100 SCCM 200 SCCM 500 SCCM 1 SLM 5 SLM 10 SLM 15 SLM 30 SLM 40 SLM 50 SLM 60 SLM 100 SLM 500 SLM 20 SLM 80 SLM 1000 SLM

See all Models See all accessories

€ 1.510,68 / each

Item# FMA5516A-ST

Added to Your Shopping Basket

In Stock

Lead Time (If not in stock): 3 weeks

+ Add to Project List

See Specs

Product Specs

<< See all Product Models

Brand
Accuracy	± 1 %
Accuracy Detail	For units with full range less than 100 SLM ± 1% FS, including linearity over 15 to 25°C (59 to 77°F) and 0.7 to 4.2 kg/cm² (10 to 60 psia). For units ≥ 100 SLM Full Range: ± 1.5% FS, including linearity over 15 to 25°C (59 to 77°F) and 0.7 to 4.2 kg/cm² (10 to 60 psia) from 20 to 100% of range; ± 3% FS from 0 to 20% of range
Altitude Sensitivity	Horizontal flow path, no shift in calibration up to +20 degree pitch
Calibration	NIST Certificate
Control Valve	Solenoid Valve
Display Type	LCD
Electrical Output	4 to 20 mA, 0 to 5 Vdc
Enclosure Ratings	Inst. Level II/Poll. Degree II (IEC 60664)
GrossWeightValue	2.96
Humidity Range	0 to 70% RH
Leak Rate Under Vacuum	less than 10^⁻⁷ cc He/s
Material Construction Option	Stainless steel Body
Materials, Wetted	FKM, Stainless Steel
Media Compatibility	Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Oxygen
Operating Pressure Note	35 kg/cm² gage (500 psig); 70 kg/cm2 gage (1000 psig) for ranges up to 100 SLPM. 1.76 kg/cm (25 psig) optimum
Operating Pressure, Max	1000 psi
Operating Pressure, Min	0 psi
Operating Temperature, Max	50 °C
Operating Temperature, Min	5 °C
Output Detail	Linear 0 to 5 Vdc: 1000 V minimum load 4 to 20 mA: 50 to 500 V loop resistance, ± 20 mV max noise
Output Signal	Current, Voltage
Pressure Coefficient	0.01% FS/psi
Pressure Drop, Max	50 psi
Process Connection Size	1/4 in
Process Connection Type	Compression Fitting
Repeatability	± 0.5%
Response Time	5 sec
Response Time Note	5 seconds to within ± 2% of set flow rate over 25 to 100% FS
Series ID	FMA5000A-Series
Supply Current	Up to 800 mA
Supply Voltage	12 to 15 Vdc
Temperature Coefficient	0.15% FS/°C
Turndown Ratio	40:1
Volumetric Flow Rate, Max	2 SLM
Volumetric Flow Rate, Min	0.25 SCCM, 0.05 SLM
Country of Origin	United States
See All Specs Show Less