India +91 8925807296 | Welcome to our new website, found an issue or bug? Please report it here
HTS-HANI-CLAMP-P
Industrial Plastic Pipe Clamp HANI Temperature Sensor
- Non-invasive temperature measurement
- Installation in seconds, no tools required
- Clamps to outside of pipe, measures fluid inside of pipe
- Accuracy comparable to an invasive sensor, ± 1.5 °C
Product Overview
- Accuracy ± 1.5 °C (± 2.7 °F)
- Accuracy Detail ± 1.5°C from factory and improved accuracy possible with in-situation 1 or 2-point calibration
- Applications Aeronautics and Aerospace, Air and HVAC, Building and Maintenance, Chemicals, Clean Water and Purified Solutions, Energy Generation and Distribution, Fluid Measurement and Control, Food and Beverage, Fuel and Gas, General Purpose, Heat and Energy Systems, Hydraulic and Pneumatic Systems, Industrial and Manufacturing, Laboratories and Scientific, Materials and Surfaces, Medical, Office and Commercial, Oils, Pharmaceutical, Waste Management
- Base Mounting PVC, CPVC, PP, PFA
- Electrical Connection M12 8 pin Female
- Enclosure Ratings IP65
- Height 2.03 in
- Length 2.53 in
- Loop Resistance (Vsupply -8V)/0.24 A
- Materials Nylon, Silicone, Brass, Stainless Steel
- Media Compatibility Clean process / cooling water, Water-based fluids
- Mounting Clamp
- Operating Temperature, Max 40 °C
- Operating Temperature, Min 0 °C
- Output Detail 4 to 20 mA User scalable analog output, default scaling 0-100°C
- Output Signal Current
- Process Temperature, Max 100 °C
- Process Temperature, Min 0 °C
- Response Time t63: 30 sec; t90: 60 sec
- Series ID HTS-HANI-CLAMP-P
- Supply Power Note 8 VDC - 28 VDC (loop powered) Max Loop Resistance: Rmax (Ω)= (Vsupply -8V)/0.24 A
- Supply Voltage 8 to 28 Vdc
- Width 2.38 in
Supported Applications
The Omega HANI™ Clamp Sensor series provides non-invasive temperature measurement for fluids inside industrial plastic pipes. Designed specifically for hybrid sensing applications, the sensor clamps to the outside of the pipe without requiring process intrusion or fluid contact.
- Pipe Materials: PVC, CPVC, PP, PFA
- Process Media: Water and water-based fluids (other fluids available upon request)
- Nominal Pipe Sizes: 1" and 2" nominal sizes are standard; other diameters are offered on request.
Operating Conditions & Performance
The HANI series operates within a process temperature range of -20 to 100 °C (-4 °F to 212 °F) for liquid media. Ambient operating conditions must remain between 0 to 40 °C (32 to 104 °F). The sensor achieves an accuracy of ±1.5 °C from the factory when fluid is flowing, with improved accuracy possible through in-situ calibration.
Performance characteristics include a response time of 30 seconds for t63 and 60 seconds for t90. The device carries an IP67 environmental rating when mated to its connector. Electrical operation requires a loop-powered supply between 8 VDC and 28 VDC.
Configuration Options
The series supports multiple configuration options across outputs, connectivity, calibration, and accessories to accommodate diverse installation needs.
Sensor Outputs & Connectivity
- Analog Output: 4 to 20 mA loop powered analog output (user scalable; default scaling is 0 to 100 °C).
- Digital Interface: Omega Link connectivity featuring I2C Clock Signal, I2C Data Signal, and Interrupt Signal.
Housing & Materials
The sensor housing consists of PA12, silicone rubber, nickel-plated brass, and stainless steel. The overall dimensions are 60.3 W x 64.31 L x 51.54 mm H (2.38" W x 2.53" L x 2.03" H). Electrical connection is provided via an M12 8-Pin connector.
Calibration Options
- CAL-3: Factory-performed 3-point calibration at 10 °C, 50 °C, and 90 °C (included in models with -CAL-3 suffix).
- CAL-4: User-selected number and value of temperature points; requires a quote.
Accessories & Interfaces
The series is compatible with Omega Link Smart Interfaces, including USB (IF-001), RS485/Modbus (IF-002), and Wireless interfaces for North America (915 MHz) or Europe (868 MHz). Additional accessories include M12 8-Pin T-splitters, field install connectors, and dual M12 cables in lengths of 1m, 3m, and 5m with straight or right-angle terminators.
Key Product Differences
The series is distinguished by pipe size compatibility and calibration status. Standard models (e.g., HANI-C-1.0I-P-MA) provide factory accuracy of ±1.5 °C for 1" or 2" pipes without additional certification documentation in the model name.
Models with the -CAL-3 suffix (e.g., HANI-C-1.0I-P-MA-CAL-3) include a certificate and calibration at three specific temperature points, maintaining the same ±1.5 °C accuracy specification but offering verified traceability for quality assurance workflows.
PDFs & Manuals
Software & Drivers
