1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
FMA3808
Stainless Steel Mass Flowmeters and Controllers

Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product ModelsBrand |
![]() |
Accuracy | ± 1 % |
Accuracy Detail | ± 1% of full scale including linearity |
Additional Features 1 | Power Supply Included |
Calibration | NIST 5-Point Certificate |
Control Valve | Solenoid Valve NC |
Display Type | None |
Electrical Connection | Sub-D Male Miniature Connector |
Electrical Output | 4 to 20 mA, 0 to 5 Vdc |
Height | 6 in |
Leak Rate Under Vacuum | less than 10^⁻⁶ cc He/s |
Length | 3.29 in |
Materials, Wetted | 17-4 Stainless Steel, 316 Stainless Steel, FKM |
Media Compatibility | Air, Gases, Nitrogen, Oxygen |
Operating Pressure, Max | 500 psi |
Operating Pressure, Min | 0 psi |
Operating Temperature, Max | 50 °C |
Operating Temperature, Min | 0 °C |
Output Detail | Linear 0 to 5 Vdc,1000 Ω min load, 4 to 20 mA,500 Ω loop resistance |
Output Signal | Current, Voltage |
Pressure Coefficient | 0.01% FS/psi |
Process Connection Size | 1/4 in |
Process Connection Type | Compression Fitting |
Repeatability | ± 0.15% |
Required Pressure, Min | 1 inH₂O |
Response Time | 5 sec |
Supply Current | 300 mA |
Supply Power Note | 24 Vdc @ 300 mA, 115 Vac, 220 Vac with AC adaptor |
Supply Voltage | 24 Vdc |
Temperature Coefficient | 0.05% FS/°C |
Turndown Ratio | 100:1 |
Volumetric Flow Rate, Max | 2 SLM |
Volumetric Flow Rate, Min | 0.1 SCCM |
Weight | 1.25 lb |
Width | 1 in |
See All Specs |
Show Ratings & Reviews
Rated 4 out of
5
by
Elena Q from
Mass flow meter
worked great for my project. the only bad is the lead times make sure to order with time.
Date published: 2023-08-14