Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here
CSF060-Series
Touch-Safe Enclosure Heater with Thermostat 50 to 150 W
- Low Surface Temperature
- Integrated Thermostat
- Quick Mounting Due to DIN Clip
- Double Insulated (Plastic)
CSF060-Series
From
AUD
321.01
Product Overview
- Electrical Connection Screw Terminal
- Enclosure Ratings IP20, NEMA Type 2
- Fitting position Vertical
- Form factor DIN Clip for 35 mm
- Heating Element Material PTC resistor
- Housing Material Plastic
- Current, Max 2.5 A
- Operating Temperature, Min -40 °C
- Protection II (Double insulated)
- Series ID CSF060-Series
- Starting Temperature 5 °C
- Storage Temperature, Max 70 °C
- Storage Temperature, Min -45 °C
- Supply Voltage 120/240 Vac
- Surface Temperature Note <80°C (176°F), except upper protective grille
- Switch-Off Temperature 15 °C
- Width 60 mm
- Wire Gauge 16 AWG
Supported Applications
The Omega CSF060 Series consists of touch-safe enclosure heaters designed for use in enclosures containing electrical and electronic components. The heater design supports natural convection to generate high air currents of warm air while maintaining low surface temperatures on accessible side surfaces.
Operating Conditions & Performance
The series operates within an ambient temperature range of -40 to 70°C (-40 to 158°F) and a storage temperature range of -45 to 70°C (-49 to 158°F). Power is supplied via 120 to 240 Vac (min 110V, max 265V), with heating capacity options of 50 W, 100 W, and 150 W. The unit features a PTC resistor heating element that provides temperature limiting.
Surface temperatures on accessible side surfaces are maintained below 80°C (176°F), excluding the upper protective grille. Air outlet temperatures measured 50 mm (2.0") above the protective grille vary by model: 86°C (186.8°F) for the 50 W unit, 120°C (248°F) for the 100 W unit, and 145°C (293°F) for the 150 W unit.
The integrated fixed-point thermostat switches off at 15°C (59°F) and starts heating at 5°C (41°F), with a tolerance of ±5K. Operating voltages below 140 Vac reduce heating performance by approximately 10%.
Configuration Options
The CSF060 Series is offered in three primary configurations distinguished by power rating and physical dimensions:
- CSF06001: 50 W heating capacity, maximum inrush current of 2.5 A, overall dimensions 110 x 60 x 90 mm (4.3 x 2.4 x 3.5"), approximate weight 0.30 kg (10.6 oz).
- CSF06011: 100 W heating capacity, maximum inrush current of 4.5 A, overall dimensions 110 x 60 x 90 mm (4.3 x 2.4 x 3.5"), approximate weight 0.30 kg (10.6 oz).
- CSF06021: 150 W heating capacity, maximum inrush current of 8 A, overall dimensions 150 x 60 x 90 mm (5.9 x 2.4 x 3.5"), approximate weight 0.50 kg (17.6 oz).
Electrical connection is provided via a 4-pole terminal for 2.5 mm² (0.10 in²) wire with a maximum torque of 0.8 Nm. The casing is constructed from black plastic according to UL94 V-0 standards, providing NEMA 2 (IP20)/II double-insulated protection.
Mounting and Installation
The units are designed for vertical fitting position and include a clip for mounting on a 35 mm (1.4") DIN rail per EN 50022 standards. The series is also available without an integrated thermostat under the CS 060 designation.
Key Product Differences
The primary variation within the stocked CSF060 Series models lies in heating capacity and physical length. Models CSF06001 and CSF06011 share identical dimensions of 110 x 60 x 90 mm (4.3 x 2.4 x 3.5"), while the higher-capacity CSF06021 extends to a length of 150 mm (5.9"). All three models include an integrated fixed-point thermostat with identical switch-off and starting temperatures.
Other voltages are available on request outside the standard 120 to 240 Vac range. The series holds CE, RoHS, and VDE approvals.
PDFs & Manuals
