Skip to search Skip to main content Skip to navigation

Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

PTH-1XA-Series

Pocket Testers for Ambient Temperature and Relative Humidity

Models In Stock
  • Gleichzeitige Anzeige von Temperatur und Luftfeuchtigkeit
  • Automatische Abschaltung (20 Min)
  • Speicher (Min/Max)
  • °F/°C Umschaltung
PTH-1XA-Series
From AUD 182.45
Models In Stock
Pocket Testers for Ambient Temperature and Relative Humidity PTH-1XA-Series PTH-1XA-Series
loading all models
Product Overview
  • Durchmesser 14.2 mm
  • Länge 160 mm
  • Messbereich Temperatur, max. 60 °C
  • Messbereich Temperatur, min. -20 °C
  • Betriebstemperatur, max. 40 °C
  • Betriebstemperatur, min. 0 °C
  • Genauigkeit bei relativer Luftfeuchtigkeit ± 3,0 % rF
  • Hinweis zur Genauigkeit der relativen Luftfeuchtigkeit 30 bis 80 % ± 3 %, Andere ± 5 % RF
  • Reaktionszeit 120 s
  • Serien-ID PTH-1XA-Series
  • Lagertemperatur, max. 60 °C
  • Lagertemperatur, min. 0 °C
  • Versorgungsspannung Hinweis 1,5V
  • Versorgungsspannung 1,5 VDC
  • Temperaturgenauigkeit ± 1 °C
  • Gewicht 50 g
  • Gewichtsangabe Ca. 50 g (1,8 oz.)

Supported Applications

The Omega PTH-1XA is a pen-style, pocket digital tester for measuring ambient relative humidity and temperature. Its compact body and clip make it a portable instrument for spot checks of indoor air conditions in HVAC service, storage and warehouse monitoring, laboratories, greenhouses, and general facilities work where a quick handheld reading is needed.

A digital display and two control buttons (A and B) let a technician read humidity and temperature directly and recall stored values. Built-in MAX/MIN memory captures the highest and lowest readings, so the tester also supports short-term monitoring of how conditions change at a location.

Operating Conditions & Performance

The PTH-1XA measures relative humidity from 20 to 95% RH and temperature from -20 to 60 °C (-4 to 140 °F). Humidity accuracy is ±3% over the 30 to 80% range and ±5% RH elsewhere, while temperature accuracy is 1.0 °C (2.0 °F).

The HighPoly humidity sensor has an absorb response time of 120 seconds from 30 to 90% and 150 seconds from 90 to 30%. The instrument runs on 1 AAA battery and powers off automatically after 10 minutes of inactivity to conserve power.

  • Operating temperature: 0 to 40 °C, at below 80% humidity.
  • Storage temperature: 0 to 60 °C, at below 70% humidity.
  • Dimensions: 14.2 x 160 mm (0.56 x 6.3").
  • Weight: Approx. 50g (1.8 oz).
  • Certifications: RoHS and ISO 9001 Certified.

Configuration Options

The PTH-1XA is offered as a single, fully specified configuration rather than a range of ordering options, so every unit shares the same sensing, display, and power features. Its capabilities are defined by its integrated functions rather than by variant codes.

  • Dual measurement: simultaneous relative humidity and temperature readings on one digital display.
  • Selectable units: the temperature reading can be changed between °C and °F.
  • MAX/MIN memory: stores peak and minimum readings; in MAX/MIN mode the unit reverts to normal after 10 seconds, and stored data is cleared when the unit is powered off.
  • Portability: pen-style body with a pocket clip, powered by a single AAA battery.

Key Product Differences

This series consists of one model, the PTH-1XA pocket tester for ambient temperature and relative humidity. There are no process-connection, probe, or output ordering options to select.

Each PTH-1XA ships with its standard accessories: a manual and an AAA battery. The instrument is RoHS compliant and ISO 9001 Certified.

Accessories

consumables

Spare AAA Duracell alkaline battery
C$18.77 / each
0 In Stock
en-AU
en_AU
Save Configuration