검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

OM-CP-XRTDTemp-Series

X-시리즈 - 다채널 RTD 온도 로거

재고가 있는 모델
  • ± 0.04 °C 보정 정확도
  • 실시간 작동
  • 최대 4 Hz 판독 속도
  • 푸시버튼 또는 프로그래머블 시작 시간
OM-CP-XRTDTemp-Series
시작 1,524,792 원
재고가 있는 모델
X-시리즈 - 다채널 RTD 온도 로거 OM-CP-XRTDTemp-Series OM-CP-XRTDTemp-Series
loading all models
제품 개요
  • 보정 소프트웨어를 통한 디지털 보정
  • 데이터 인터페이스 USB
  • 데이터 인터페이스 주의사항 USB-A to micro USB 케이블(포함); 460,800 baud
  • 전기 연결 나사 단자
  • 인클로저 알루미늄
  • 폼팩터 벤치탑
  • LED 표시기 채널당 1개 및 상태 LED 2개
  • 길이 65.6 mm
  • 작동 습도 0 ~ 95% RH
  • 작동 온도, 최대 60 °C
  • 최소 작동 온도 -20 °C
  • 공정 온도, 최대 850 °C
  • 최소 공정 온도 -200 °C
  • 공정 온도 사양 참고 18.5 Ω ~ 390.5 Ω -200 °C ~ +850 °C (-328 °F ~ +1562 °F) (프로브 의존)
  • 실시간 기록 PC와 함께 사용하여 실시간으로 데이터를 모니터링하고 기록할 수 있습니다
  • 샘플, 최대 2800000
  • 샘플링 속도 1일
  • 샘플링 속도 사양 참고 4Hz에서 최대 24시간마다 1회 판독까지
  • 시리즈 ID OM-CP-XRTDTemp-Series
  • 소프트웨어 호환성 Windows XP SP3/7/8/10
  • 시작 모드 조절 가능한 지연 시작, 즉각 시작
  • 전원 유형 배터리
  • 온도 해상도 0.001 °C
  • 온도 해상도 사양 참고 0.0001 Ω 0.001 °C (0.0018 °F) (프로브 의존)
  • 온도 센서 유형 RTD
  • 시간 정확성 ± 1분/월
  • 폭 184.2 mm

Supported Applications

The Omega OM-CP-RTDTempX Series consists of multi-channel RTD-based temperature data loggers designed for remote temperature monitoring or multiple points in a central location. These devices support simultaneous logging across all channels, enabling users to capture date and time-stamped data for analysis after the monitoring cycle is complete. The series facilitates real-time recording when used with a PC via free OM-CP software.

Operating Conditions & Performance

The X-Series measures temperatures from -200 °C to +850 °C (-328 °F to +1562 °F), which is probe dependent. A specified accuracy range of -200 °C to +200 °C (-328 °F to 392 °F) applies for calibrated accuracies based on standard Omega calibrations for the 0 Ω to 200 Ω range. Temperature resolution is 0.001 °C (0.0018 °F), and resistance resolution is 0.0001 Ω, both probe dependent.

Calibrated accuracy is ±0.04 °C (±0.072 °F) for temperature measurements and ±0.015 Ω @ 25 °C (77 °F) ambient. The reading rate ranges from 4 Hz up to 1 reading every 24 hours. Time accuracy is specified as ±1 minute/month, with a typical battery life of 18 months using the included user-replaceable 9 V lithium battery.

Operating environment limits are -20 °C to +60 °C (-4 °F to +140 °F) and 0 %RH to 95 %RH non-condensing. The enclosure is constructed of black anodized aluminum, and the series carries CE and ROHS approvals.

Input Connection & Probe Compatibility

The input connection utilizes a removable screw terminal supporting 2, 3, or 4 wire interfaces. Temperature specifications are based on ideal 100 Ω Pt RTD compliant with IEC 751 (1983) and ITS-90, using a 5000 Ω FSR configuration.

  • Recommended: 100 Ω, 2 or 4 wire RTD probes for the most accurate performance.
  • Note on 3-wire compatibility: Most 100 Ω, 3 wire RTD probes will work, but accuracy is not guaranteed. To determine if a 3-wire probe works, resistance between two same-colored wires should be less than 1 Ω.

Configuration Options

The series offers four channel configurations: 4-channel, 8-channel, 12-channel, and 16-channel. Memory capacity varies by the number of enabled channels; with all channels active, storage ranges from 698,709 readings per channel (4-channel) down to 174,677 readings per channel (16-channel). Users can enable or disable individual channels to maximize memory and name each channel with up to a ten-digit title.

Physical Dimensions & Weight

Housing dimensions increase with channel count:

  • 4-channel / 8-channel: 2.70 in x 7.25 in x 1.22 in (65.6 mm x 184.2 mm x 31.0 mm); Weight: 13 oz (368 g).
  • 12-channel: 2.70 in x 7.25 in x 1.68 in (65.6 mm x 184.2 mm x 42.7 mm); Weight: 20 oz (580 g).
  • 16-channel: 2.70 in x 7.25 in x 2.14 in (65.6 mm x 184.2 mm x 54.4 mm); Weight: 28 oz (800 g).

Software & Data Management

The series ships with a USB-A to micro USB cable for connection to Windows XP SP3/7/8/10 systems at 460,800 baud. Start modes include software-programmable immediate start or delay start up to 6 months in advance. Digital calibration is performed through the software, and the calibration date is automatically recorded within the device.

Data formats support C, °F, K, °R, and Ω units with graphical, tabular, and statistical analysis options via OM-CP Standard Software version 4.2.19.0 or later, or Secure Software version 4.2.18.0 or later.

Key Product Differences

The series is available in four distinct model numbers corresponding to channel count:

  • OM-CP-QUADRTDTEMP-A2: 4-Channel RTD Data Logger, includes USB-A to micro USB cable and universal power adapter.
  • OM-CP-OCTRTDTEMP-A2: 8-Channel RTD Data Logger, includes USB-A to micro USB cable and universal power adapter.
  • OM-CP-X12RTDTEMP-A2: 12-Channel RTD Data Logger, includes USB-A to micro USB cable and universal power adapter.
  • OM-CP-X16RTDTEMP-A2: 16-Channel RTD Data Logger, includes USB-A to micro USB cable and universal power adapter.

A replacement battery is available as part number OM-CP-BAT103. The device stops recording when memory ends or the user stops it; re-arming via computer is required before restarting.

ko-KR
ko_KR
설정 저장