한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Series-645
습식/습식 차압 트랜스미터, ± 0.25% 정확도, 4-20 mA
- 액체 또는 가스용 다목적 고정밀 장치로, 애플리케이션 지원을 위한 보다 정밀한 측정을 요구하는 설계에 적합
- 옵션 3방향 밸브 매니폴드는 공정 중단 없이 트랜스미터 설치 또는 제거를 간소화하는 데 도움
제품 개요
- 정확도 ± 0.25%
- 정확도 세부 사항 ± 0.25% FS (RSS)
- 디스플레이 유형 해당 없음
- 전기 연결 나사 단자 블록 포함 1/2인치 NPS 암나사 컨듀잇
- 외함 등급 IP56, NEMA 타입 4X
- 미디어 호환성 연료 가스, HVAC / 실내 공기, 비활성 가스/비반응성 가스, 증기
- 작동 온도, 최대 80 °C
- 최소 작동 온도 -22 °C
- 압력 유형 차동
- 프로세스 연결 크기 1/4인치
- 응답 시간 30~50 ms
- 시리즈 ID Series-645
- 스팬 조정 조절 가능
- 저장 온도, 최대 126 °C
- 보관 온도 최소 -54 °C
- 열 효과 ± 0.02% FS/°F
- 열 효과 사양 참고 (제로 및 스팬 포함) ± 0.02% FS/°F, 30~150 °F (-1~65 °C).
- 제로 설정 조절 범위 조정 가능, ± 1 mA, 비상호 간섭형
Supported Applications
The Dwyer Series 645 Wet/Wet Differential Pressure Transmitters are designed for measuring differential pressure in systems where compatible gases or liquids can be applied to both the high and low (reference) ports. The series utilizes a fast response capacitance sensor with an isolation system that transmits diaphragm motion from the line pressure environment to a dry enclosure, enabling accurate measurement even when liquid is present on both sides.
Documented applications include:
- Process control
- Filter condition monitoring
- Refrigeration equipment
- Pump speed control
- HVAC equipment
- Liquid level measurement
Operating Conditions & Performance
The Series 645 delivers a ±0.25% FS (RSS) accuracy with non-interactive zero and span adjustments of approximately ±1 mA. The transmitter features a response time of 30 to 50 ms and operates within an ambient temperature range of 0 to 175°F (-22 to 80°C). Storage temperatures are rated from -65 to 260°F (-54 to 126°C).
Thermal effects, including zero and span drift, are specified as ±0.02% FS/°F within the range of 30 to 150°F (-1 to 65°C). The unit is powered by a supply voltage of 11-30 VDC with a loop resistance capability of 0 to 1000 Ω.
Pressure limits vary by measurement range. For the high side, maximum overload pressure is defined as: 20 x FS for ranges up to 5 psi; 10 x FS for 10 to 25 psi; 5 x FS for 50 psi; and 2.5 x FS for 100 psi. The low side limit is rated at 2.5 x FS.
Configuration Options
The series offers a range of differential pressure spans from 0 to 1 psid up to 0 to 100 psid, available in standard configurations and with optional manifold assemblies. The transmitter housing is constructed of stainless steel/aluminum with an enclosure rating of NEMA 4X (IP56).
Key configurable features and specifications include:
- Process Connection: 1/4"-18 female NPT
- Electrical Connection: Barrier strip terminal block with conduit enclosure featuring a .875" (22 mm) diameter opening for 1/2" ID conduit.
- Wetted Materials: 17-4 PH stainless steel, 300 Series stainless steel, fluoroelastomer and silicone O-rings, and bleed screw seals.
- Bleed Ports: Three bleed screws (two for the low pressure port, one for the high) allow for air elimination from lines and cavities.
An optional 3-valve manifold assembly is available to facilitate installation and maintenance. This accessory includes a brass manifold with 90° on/off valves and matches the 1/4"-18 female NPT process connection. A NIST traceable calibration certificate (order code: NISTCAL-PT1) is also offered.
Key Product Differences
The Series 645 model numbering indicates the specific differential pressure range, such as Model 645-0 for 0 to 1 psid through Model 645-6 for 0 to 100 psid. Specific SKUs ending in "-3V" denote units supplied with the optional 3-valve manifold assembly.
While the standard unit provides a barrier strip terminal block, models configured with the 3-valve option include the brass manifold and valve set integrated into the order code designation. All variants maintain the same core performance specifications regarding accuracy, response time, and environmental ratings as defined in the series data sheet.

