검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-SVE

RSV용 방수 솔레노이드 밸브 인클로저, 6/12 밸브, 맞춤형

  • 내후성 인클로저
  • 터미널 블록에 사전 배선 주문 가능
  • 6개 또는 12개 밸브 크기 가능
Series-SVE
시작 1,227,933 원
RSV용 방수 솔레노이드 밸브 인클로저, 6/12 밸브, 맞춤형 Series-SVE Series-SVE
loading all models
제품 개요
  • 전선관 연결 3/4인치 NPT 암나사
  • 전기 연결 나사 단자
  • 외함 등급 IP66, NEMA 타입 4X
  • 인클로저 유형 방수
  • 재료 알루미늄, NBR
  • 접액부 재질 알루미늄, 부나-N (NBR), 스테인리스 스틸
  • 미디어 호환성 깨끗한 건조 공기 / 불활성 가스, 비활성 가스/비반응성 가스
  • 장착 방향 위치 민감이 아니야
  • 작동 온도, 최대 122 °F
  • 최소 작동 온도 -4 °F
  • 공압관 길이 최대 9.8피트
  • 전력 소비 12 W, 돌입 공격: 17 VA, 홀딩: 14.5 VA
  • 압력 한계 4.4 ~ 124.7 psi
  • 프로세스 연결 크기 1/8인치
  • 프로세스 연결 유형 NPT 암나사
  • 공정 온도, 최대 185 °F
  • 최소 공정 온도 -4 °F
  • 시리즈 ID Series-SVE

Supported Applications

The Dwyer Series SVE Solenoid Valve Enclosures are multi-valve enclosures designed for the RSV pilot valve. These units provide a weatherproof package with all solenoids pre-wired to a terminal block, intended to operate the Series RDCV remote type diaphragm valve. The system is configured for service with compatible gases that are filtered and oil free.

Operating Conditions & Performance

The series supports an ambient temperature range of -4 to 122°F (-20 to 50°C) and an operating temperature limit of -4 to 185°F (-20 to 85°C). Pressure limits for the RSV pilot valve are a minimum of 4.4 psi (0.3 bar) and a maximum of 124.7 psi (8.6 bar). The enclosure rating is NEMA 4X, with IP ratings documented as either IP65 or IP66 depending on the source document.

Power requirements for the RSV pilot valve are 110 VAC, 220 VAC, or 24 VDC. Power consumption is specified as 12 W, with an inrush of 17 VA and a holding current of 14.5 VA. The maximum pneumatic tube length supported is 9.8 ft (3 m).

Configuration Options

The Series SVE offers configurable options for solenoid quantity, voltage, and enclosure type to meet specific installation needs.

  • Solenoid Quantity: Available in 6-valve or 12-valve configurations.
  • Voltage Options: Configurable for 110 VAC, 220 VAC, or 24 VDC pilot valves.
  • Housing Material: Anodized aluminum with NBR gasket.
  • Electrical Connection: All RSV units are pre-wired to a terminal strip. Individual solenoid options include DIN connection or wire leads (18 AWG, 22" / 55 cm long).
  • Process Connections: The RSV pilot valve features a 1/8" female NPT process connection; the enclosure includes a 3/4" female NPT conduit connection.
  • Mounting Orientation: Any position is supported.

The wetted materials for the RSV component include an aluminum body, 304 SS core and spring, and NBR seals. The enclosure dimensions vary by model: SVE06 units measure approximately 10-5/8" [270] x 4-11/64" [106] x 6-5/16" [160], while SVE12 units measure approximately 18-29/32" [480] x 4-11/64" [106] x 6-5/16" [160].

Key Product Differences

The series distinguishes between two primary enclosure sizes based on the quantity of solenoids housed:

  • SVE06 Series: Enclosures containing 6 RSV pilot valves. Model examples include SVE06WP61 (110 VAC), SVE06WP62 (220 VAC), and SVE06WP63 (24 VDC).
  • SVE12 Series: Enclosures containing 12 RSV pilot valves. Model examples include SVE12WP121 (110 VAC), SVE12WP122 (220 VAC), and SVE12WP123 (24 VDC).

Model nomenclature follows the pattern SVE, where the voltage code corresponds to 61 for 110 VAC, 62/122 for 220 VAC, and 63/123 for 24 VDC. The RSV pilot valves themselves are available with DIN connectors or wire leads (e.g., RSV1D vs. RSV1L).

ko-KR
ko_KR
설정 저장