검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-S2-4

방수 파이프 온도 어셈블리 – 스트랩 온, 트위스트 오프, 11가지 출력 옵션

Series-S2-4
시작 219,111 원
방수 파이프 온도 어셈블리 – 스트랩 온, 트위스트 오프, 11가지 출력 옵션 Series-S2-4 Series-S2-4
loading all models
제품 개요
  • 외함 등급 IP66, NEMA 타입 4X
  • 하우징 재질 플라스틱
  • 장착 방향 파이프에 스트랩온
  • 작동 온도, 최대 240 °F
  • 최소 작동 온도 -32 °F
  • 파이프 크기, 최대 5 in
  • 파이프 크기, 최소 2 in
  • 시리즈 ID Series-S2-4
  • 보호관 재질 구리 도체

Supported Applications

The Dwyer Series S2-4 Weatherproof Surface Temperature Assembly is designed for monitoring the temperature of distribution lines when it is not possible to penetrate the pipe. The assembly utilizes a strap-on connection that wraps around pipes ranging from 2 to 5" in diameter, allowing secure tightening with a flat head screw driver.

Operating Conditions & Performance

The series operates within a process temperature range of -32 to 240°F (-35.5 to 115.5°C). Accuracy specifications vary by sensor type:

  • Platinum RTD: ±0.6% @ 32°F (0°C)
  • Nickel RTD: ±0.5°F @ 32°F (0°C)
  • Balco RTD: ±0.1% @ 32°F (0°C)
  • Thermistors: ±0.36°F from 32 to 158°F (0 to 70°C)

The housing features a NEMA 4X (IP66) enclosure rating and includes four ø0.896" [22.76 MM] 1/2" NPT conduit knockouts for flexible wiring entry.

Configuration Options

The Series S2-4 is available with a choice of 11 output options to communicate with standard building control systems. The model number format follows the pattern S2-<XX>, where <XX> denotes the specific sensor type.

  • RTD Sensors:
  • S2-41: Pt 100 Ω RTD
  • S2-42: PT 1000 Ω RTD
  • S2-43: Ni 1000 Ω RTD
  • S2-44: Balco 1000 Ω RTD
  • Thermistor Sensors:
  • S2-45: 10K Ω Type II Thermistor
  • S2-46: 3K Ω Thermistor
  • S2-47: 5K Ω Thermistor
  • S2-48: 100K Ω Thermistor
  • S2-49: 20K Ω Thermistor
  • S2-4A: 2252 Ω Thermistor
  • S2-4B: 10K Ω Type III Thermistor

Physical dimensions include an overall diameter of 3-31/32 [101.00] and a height of 2-7/32 [56.15]. The pipe fit diameter is specified as 3-1/4 [82.39].

Key Product Differences

Variation within the series is defined by the sensor element selected, which determines both the model number and the electrical output characteristics (resistance values). The housing design remains consistent across all variants, featuring a twist-off cover to reduce installation time. All models share the same strap-on mounting mechanism suitable for 2 to 5" pipe sizes.

ko-KR
ko_KR
설정 저장