검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-DTFO

액체용 가변 면적 유량계, ± 2% 정확도, 금속, 3000 psig

  • 내구성이 뛰어난 금속 구조로 최대 3000 psig(200 bar)의 시스템 압력을 견딜 수 있는 높은 신뢰성 및 강도 보장
  • 유리 튜브 가변 면적 유량계와 달리 파손 방지 구조로 긴 작동 수명 제공
  • 고온, 고진동, 충격이 잦은 환경에서 정밀한 성능 발휘
Series-DTFO
시작 2,745,603 원
액체용 가변 면적 유량계, ± 2% 정확도, 금속, 3000 psig Series-DTFO Series-DTFO
loading all models
제품 개요
  • 정확도 ± 2%
  • 다이얼 직경 2.5인치
  • 작동 온도, 최대 200 °F
  • 최소 작동 온도 -40 °F
  • 압력 유형 궤간
  • 프로세스 연결 유형 NPT 암나사
  • 반복성 ± 1%
  • 스케일 미디어 보정 석유
  • 시리즈 ID Series-DTFO
  • 부피 유량, 최소 0 GPM

Supported Applications

The Dwyer Series DTFO Variable-Area Flowmeter is designed for measuring oil flow rates in industrial systems. As an in-line mounting device, it provides direct indication of liquid volume with durable metal construction suitable for high-pressure environments.

Operating Conditions & Performance

The series delivers ±2% FS accuracy when calibrated for liquids (oil) and offers a repeatability of ±1% FS. It operates within a process temperature range of -40 to 200°F (-40 to 93°C). Pressure ratings vary by model configuration: DTFO-1B and DTFO-2B models are rated up to 3000 psig (200 bar), while the larger DTFO-3S models support pressures up to 1500 psig (100 bar).

Installation requires horizontal mounting for maximum accuracy, as factory calibration is performed in this orientation. The device utilizes a magnetic coupling system; therefore, external magnetic materials should be kept at least 3 inches (7.6 cm) away from the unit to prevent interference with readings.

Configuration Options

The Series DTFO encompasses multiple flow ranges and connection sizes tailored for oil service:

  • Flow Ranges: Available in increments including 0 to 1, 2, 3, 4, 5, 8, 10, 15, 20, 25, and 30 GPM Oil.
  • Process Connections: Options include 1/4" NPT (DTFO-1B), 1/2" NPT (DTFO-2B), and 1" NPT (DTFO-3S).
  • Housing Materials: Brass bodies are offered for DTFO-1B and DTFO-2B series; Stainless Steel (SS) is used for the DTFO-3S series.
  • Metering Cones: Acetal cones are standard on brass models, while PTFE cones are specified for stainless steel models.

The dial face diameter measures 2.5" (63.5 mm). Wetted materials include a 302 SS spring and range spring, Buna seals, and magnets coated with PTFE.

Key Product Differences

Differences within the series are defined by body material, connection size, and maximum flow capacity:

  • DTFO-1B Series: Features a brass body with 1/4" NPT connections. Flow ranges extend from 0 to 5 GPM Oil.
  • DTFO-2B Series: Utilizes a brass body with 1/2" NPT connections, supporting flow rates up to 10 GPM Oil (e.g., DTFO-2B-8O and higher).
  • DTFO-3S Series: Constructed with stainless steel bodies and 1" NPT connections. This configuration supports the highest ranges in the series, from 0 to 10 GPM up to 0 to 30 GPM Oil.

Note that model numbers for oil service are derived by changing water calibration suffixes (W) to oil designations (O), such as DTFO-1B-4O. The series is not field-serviceable; units requiring repair must be returned to the factory.

ko-KR
ko_KR
설정 저장