日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
HHF-SD2-Meter
Vane Anemometer with Real Time Data Logger
실시간 데이터 로거가 포함된 베인 풍속계- 저마찰 볼 베어링 베인
- K형 또는 J형 열전대 입력
- 실시간 SD 메모리 카드 데이터 로거
- 녹색 백라이트 LCD
製品の概要
- 정확도 ± 2%
- 정확도 세부 사항 ± (2% + 40 fpm)
- 공기 속도, 최소 70 m/h
- 배터리 크기 및 종류 알칼리성 AAA
- 데이터 인터페이스 RS232, USB
- 표시 단위 °C, °F, ft/min, K/h, knot, mile/hr, m/s
- 디스플레이 유형 Vac라이트 LCD
- 폼팩터 휴대용
- 높이 8 in
- 길이 3 in
- 작동 습도 0 ~ 85% RH
- 작동 온도, 최대 50 °C
- 최소 작동 온도 0 °C
- 전력 소비 최대 48 mA
- 프로브 직경 2.83 in
- 공정 온도, 최대 50 °C
- 최소 공정 온도 0 °C
- 샘플링 시간 1초 ~ 3600초
- 샘플링 시간 사양 참고 샘플링 시간: 자동: 1초에서 3600초 수동: 데이터 로거 버튼을 한 번 누르면 데이터를 한 번 저장합니다
- 시리즈 ID HHF-SD2-Meter
- 공급 전력 참고 알칼라인 배터리 또는 하드 듀티 배터리
- 온도 정확도 ± 0.5 %
- 온도 센서 유형 열전쌍 타입 K 또는 서미스터
- 무게 515 g
- 폭 1.5 in
Supported Applications
The HHF-SD2 is a combination vane anemometer and thermistor thermometer with a built-in real-time SD card data logger. It measures air velocity and air temperature at the same time through a vane probe, and accepts a Type K thermocouple input for additional surface or immersion temperature measurement. Logged data is written directly to an SD memory card as Excel-compatible (.xls) files.
A backlit LCD, automatic temperature compensation, and multiple selectable velocity units make the HHF-SD2 a strong fit for air conditioning and heating systems, ventilation balancing, duct and grille airflow surveys, and general environmental air-movement testing. An optional RS232/USB interface with software lets logs be transferred to a PC for analysis.
The meter comes complete with a vane probe, a hard carrying case, a 2 GB SD card, and a free 1 m (40") Type K insulated beaded-wire thermocouple with subminiature connector and wire spool caddy. It is not designed for and should not be used in human applications.
Operating Conditions & Performance
Air velocity is measured from 0.4 to 25.0 m/s — equivalent to 1.4 to 90.0 km/h, 0.9 to 55.9 mph, 0.8 to 45.6 knot, or 70 to 4921 ft/min — with an accuracy of ±(2% + 0.2 m/s) and a resolution of 0.1 m/s (1 ft/min). Air temperature is reported at 0.1°C (0.1°F) resolution. The vane probe measures 72 mm dia (2.83").
Data-logging and interface behavior includes:
- Sampling time (Auto): 1 to 3600 seconds, with the display updating at 1 second
- Memory: SD memory card storing Excel-compatible logs
- Interface: RS232 and USB (each with optional cable and software)
- Display: 52 x 38 mm (2.05 x 1.50") LCD with switchable green backlight
The unit runs on 6 "AAA" alkaline or heavy-duty batteries (included) or an optional 9V power adaptor, drawing 15 mA DC without the SD card or backlight and 36 mA with all functions active. It operates from 0 to 50°C (32 to 122°F) at less than 85% RH, weighs 515 g (1.13 lb), and measures 203 L x 76 W x 38 mm D (8 x 3 x 1.50"). The instrument is manufactured to ISO 9001 quality standards.
Configuration Options
Offered as a single model, the HHF-SD2's versatility comes from its selectable measurement scales and its thermocouple input. Velocity can be displayed in m/s, km/h, ft/min, knots, or mile/hr, and temperature reads in °C or °F with automatic temperature compensation.
When a thermocouple is fitted (sold separately), the measuring capability depends on the sensor type. A Type K sensor covers -50 to 1300°C (-58 to 2372°F), while a Type J sensor covers -50 to 1200°C (-58 to 2192°F); both provide 0.1°C resolution and ±(0.4% + 0.5°C) accuracy over their main spans, easing to ±(0.4% + 1°C) at the coldest sub-range.
Key Product Differences
The series consists of one meter supported by a set of interface and replacement accessories:
- HHF-SD2 — Data-logging vane anemometer with SD card
- SW-U101-WIN — Software for data logging from meters, with USB and RS232 cables
- HC-SD — Replacement hard carrying case
- SC-SD — Soft carrying case
- ADAPTER-SD — AC adaptor
- USB-SD — Spare USB cable (SW-U101-WIN software required)
- RS232-SD — Spare RS232 cable (SW-U101-WIN software required)
- 2GB-SD — Spare 2 GB SD memory card
Type K and Type J thermocouples are ordered separately to match the temperature task, and a spare beaded-wire thermocouple is available as model SC-GG-K-30-36.
PDFとマニュアル
アクセサリー
accessories
Anemometers for Spare 2 GB SD memory card
/ each
0 facet.availability.sku_availability
Optional AC adaptor with 2-pin EU and USA plugs
€ 38,19 / each
3 facet.availability.sku_availability
Datalogging so ftware for SD meters
/ each
0 facet.availability.sku_availability
cables
RS232 cable (SW-U101-WIN so ftware required)
/ each
0 facet.availability.sku_availability