검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

MFT

진공 및 압력 NPT 피드스루, 다중 온도 프로브 밀봉용

재고가 있는 모델
  • 압력 또는 진공 응용
  • 다중 열전대 밀봉
  • 다중 보호관 밀봉
  • NPT 장착 나사산
MFT
시작 221,012 원
재고가 있는 모델
진공 및 압력 NPT 피드스루, 다중 온도 프로브 밀봉용 MFT MFT
loading all models
제품 개요
  • 시리즈 ID MFT

Supported Applications

The Omega MFT series consists of multiconductor feedthroughs designed for applications requiring several thermocouple sensors to pass through a wall or bulkhead at one opening. These compression-type fittings are engineered for high-pressure or vacuum applications when used with stainless steel ferrules, providing sealing capabilities within small areas.

Operating Conditions & Performance

The MFT series supports probe diameters ranging from 1 to 6 mm (0.040 to ¼ inch). The fittings are constructed for heavy-duty use in pressure or vacuum environments, utilizing a compression mechanism that deforms ferrules upon installation. Ferrule replacement is required when re-using the feedthrough assembly.

Configuration Options

The series offers extensive configuration options across mounting threads, probe counts, and material selections to accommodate specific sealing requirements.

  • Housing Material: 416 stainless steel (SS) body and cap.
  • Ferrule Materials: Standard 300 series stainless steel ferrules; PTFE ferrules available for re-use applications or by adding the '-PTFE' suffix to the model number.
  • Mounting Threads: Available in NPT (Standard) and ISO T/BPST (Metric, add '-BSPT' suffix).
  • Probe Capacity: Configurable for 3 up to 16 probes per fitting depending on the sheath diameter.
  • Dimensions: Vary by model based on probe count and thread size; standard lengths (L1) range from 2 inches to 2-13/16 inches, with metric equivalents provided in specification tables.

Replacement parts include stainless steel ferrules (SS-FER-*), PTFE ferrules (T-FER-*), and optional male threaded caps for various NPT sizes. Teflon tape is also available as an accessory.

Key Product Differences

The MFT series distinguishes between standard inch-based models and metric ISO-threaded versions, with specific model number structures reflecting sheath diameter and probe count (e.g., MFT-040-16 for 0.040-inch probes in a configuration supporting up to 16). Variants are further differentiated by ferrule material: standard stainless steel or PTFE.

Model numbers follow the format MFT-[Sheath Diameter Code]-[Number of Probes]. Metric models require the addition of '-BSPT' to the base model number. Optional male threaded caps (Part Numbers FTN-1, FTN-1-12, FTN-1-14) are available for ¼", ½", and ¾" NPT threads respectively.

MFT-0401161831614M10M15M30M45M60-3-4-5-6-8-10-12-16-PTFE
프로브 직경
프로브 수
프로브 재질
ko-KR
ko_KR
설정 저장