검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

MFT-Metric

진공 및 압력 BSPT 피드스루, 밀봉용 미터법 온도 프로브용

재고가 있는 모델
옵션 제공:
  • 압력 또는 진공 응용 분야
  • 다수의 열전대 및 보호관 밀봉
  • NPT 및 ISO T/BPST 장착 나사 모두 사용 가능
  • 1개의 피팅에 최대 16개 프로브 장착 가능
MFT-Metric
시작 324,554 원
재고가 있는 모델
진공 및 압력 BSPT 피드스루, 밀봉용 미터법 온도 프로브용 MFT-Metric MFT-Metric
loading all models
제품 개요
  • 프로세스 연결 크기 3/4인치
  • 시리즈 ID MFT-Metric
  • 와이어 게이지 20 AWG

Supported Applications

The Omega MFT Metric series comprises multiconductor feedthroughs designed for applications requiring multiple thermocouple sensors or protection tubes to pass through a wall, bulkhead, or vessel at a single opening. These compression-type fittings are engineered for pressure and vacuum applications when used with stainless steel ferrules.

Operating Conditions & Performance

The MFT Metric series is constructed from 416 SS (stainless steel) bodies and caps, providing heavy-duty performance suitable for high-pressure or vacuum environments. The fittings accommodate probe diameters ranging from 1 to 6 mm (0.040 to ¼"). Standard configurations include 316 SS ferrules, while OMEGALOK® ferrules are also standard features.

Important operational constraints regarding maintenance and safety:

  • Ferrules must not be re-used; once the pusher part of the assembly presses against them, both steel and Teflon (PTFE) ferrules become deformed. Ferrules should always be replaced when re-using the feedthrough.
  • If any leakage is detected, pressure must be returned to atmosphere immediately before repairing or replacing fittings.
  • Parts from other manufacturers should not be mixed or interchanged; only Omega parts are recommended to prevent product failure.

Configuration Options

The series supports a wide range of configurations defined by sheath diameter, probe count, and thread type. Models follow the naming convention MFT--, with an optional "-BSPT" suffix for metric ISO T/BPST threads.

Probe Capacity and Sheath Sizes

The series accommodates probe diameters from 1.0 mm to 6.0 mm, supporting between 3 and 16 probes in a single fitting depending on the sheath size:

  • MFT-M10 (1.0 mm): Supports 3, 5, 6, 8, 10, 12, or 16 probes.
  • MFT-M15 (1.5 mm): Supports 3, 5, 6, 8, 10, 12, or 16 probes.
  • MFT-M30 (3.0 mm): Supports 3, 4, 6, or 8 probes.
  • MFT-M45 (4.5 mm): Supports 3 or 5 probes.
  • MFT-M60 (6.0 mm): Supports 3 probes.

Ferrule Materials and Options

All fittings are supplied with stainless steel ferrules as standard. PTFE ferrules are available by adding the "-PTFE" suffix to the model number, incurring an additional cost per ferrule (one required for each conductor). Replacement ferrules are offered in both 316 SS and PTFE materials across all metric diameters.

Mounting Threads

The series is available with NPT or ISO T/BPST threads. To order the metric version, add "-BSPT" to the model number at no additional charge. Thread sizes correspond to probe capacity:

  • ¼": Used for MFT-M10 and MFT-M15 models with 3 or 5 probes.
  • ½": Used for MFT-M10, MFT-M15 (6–8 probes), MFT-M30 (3–4 probes), and MFT-M45 (3 probes).
  • ¾": Used for MFT-M10, MFT-M15 (10–16 probes), MFT-M30 (6–8 probes), MFT-M45 (5 probes), and MFT-M60.

Key Product Differences

Variants within the series differ primarily by sheath diameter, number of conductors supported, thread size, and ferrule material. The "-PTFE" suffix denotes units equipped with PTFE ferrules instead of standard 316 SS ferrules.

Optional accessories include Male Threaded Caps (models FTN-1 for ¾", FTN-1-12 for ½", and FTN-1-14 for ¼" NPT) which replace the standard cap locking nut. PTFE tape is also available as an accessory.

MFT-M10-M15-M30-M45-M60-3-4-5-6-8-10-12-16-PTFE
프로브 직경
프로브 수
피드스루 재질
ko-KR
ko_KR
설정 저장