한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
LCHD
초저형 인장 및 압축 로드셀
- 5포인트 NIST 추적 교정, 인증서 제공
- 스케일 응용을 위한 0.25% 교환성
- 전부 산업용 등급 스테인리스강(예: 304/316 SS)
제품 개요
- 추가 기능 1 포텐셔미터 없음
- 승인 FM
- 보정 옵션 5 포인트 NIST
- 전기 출력 노트 FM 본질 안전 4~20 mA 출력(장력에서 0부터 전체 범위까지 보정됨)
- 힘 유형 압축, 긴장
- 입력 저항 350 ± 10 Ω
- 상호 교환 가능성 0.0025
- 로드셀 타입 팬케이크
- 재료 17-4 PH 스테인리스 스틸
- 비선형성 0.001
- 작동 온도, 최대 75 °C
- 최소 작동 온도 -40 °C
- 출력 저항 350 ± 10 Ω
- 공정 온도, 최대 71 °C
- 최소 공정 온도 16 °C
- 안전 과부하 150% FS
- 시리즈 ID LCHD
- 공급 전압 10 Vdc, 최대 15V
- 열적 스팬 효과 ± 0.009% rdg/°C
- 열 영점 효과 ± 0.009% FSO/°C
- 트림 팟 접근 전혀 없습니다
- 영점/밸런스 오차 4 mA +10%, -2% 조정 가능
Supported Applications
The Omega LCHD Series consists of ultra low profile, tension and compression load cells designed for force measurement in severe environments. These pancake-style sensors utilize high-quality strain gages and precision techniques to ensure long-term stability. The series is calibrated in tension with capacities ranging from 5 lb (2.3 kgf) up to 500,000 lb (10,000 kgf). Designed for mounting via through holes and a threaded center shaft, the LCHD Series incorporates two stabilizing diaphragms welded to the sensing member to reduce off-center and side-load effects.
Operating Conditions & Performance
The series operates within an ambient temperature range of -65°F to 250°F (-54°C to 121°C), with a compensated temperature range of 60°F to 160°F (16°C to 71°C). Thermal effects are specified as Zero: 0.0036% FSO/°C and Span: 0.0036% FSO/°C. Performance specifications vary by capacity:
- Linearity: ±0.25% FSO for capacities ≤25 lb (10 kgf); ±0.10% FSO for ≥50 lb (20 kgf).
- Hysteresis: ±0.10% FSO for ≤25 lb; ±0.08% FSO for ≥50 lb.
- Repeatability: ±0.10% FSO for ≤25 lb; ±0.03% FSO for ≥50 lb.
The load cells feature a 350 Ω bonded foil strain gage bridge with an excitation voltage of 10 Vdc (maximum 15 V). Safe overload is rated at 150% of capacity, and ultimate overload is 300%. Full-scale deflection typically ranges from 0.025 to 0.076 mm (0.001" to 0.003").
Configuration Options
The LCHD Series offers a broad envelope of configurations including standard imperial models and metric variants (LCMHD). Key configurable dimensions include overall diameter, height, and threaded shaft sizes that scale with capacity:
- Capacities: 5 lb to 500,000 lb (2.3 kgf to 10,000 kgf).
- Housing Materials: 17-4 PH stainless steel for all models; 4340 alloy steel is noted in the manual for capacities ≤200 k.
- Electrical Connections: Includes a mating connector. Units up to 5,000 lb use PT06F-10-6S (or DT02H-10-6P); units from 7.5k to 500k use MS3102E-14S-6P.
- Output Signals: Standard output is 2 mV/V for ≤25 lb and 3 mV/V for ≥50 lb, with accuracy ±0.25% FSO.
The series supports several optional suffixes to modify functionality:
- .5E: 5 V Output (calibrated 0 to 5 Vdc in tension; bi-directional ±5 Vdc).
- -DUAL: Dual Bridge configuration.
- .TEDS: IEEE 1451.4 module support.
- -TC1 / -TC2: Extended temperature range options (-45 to 93°C and up to 163°C).
- .OL: Overload stops included.
Key Product Differences
The series distinguishes between standard imperial models (LCHD) and metric models (LCMHD), with specific model numbers corresponding to capacity ranges. For example, LCHD-5K represents a 5,000 lb unit, while LCMHD-10K corresponds to a 10,000 kgf unit. Tension plates are available as accessories for specific ranges (e.g., LCHD-TP225 for 50–1,000 lb). Models exceeding 300,000 lb capacity are calibrated at the 300,000 lb point.
Electrical pinouts follow a standard configuration: Pins A & B (+) Excitation; C & D (-) Excitation; E (-) Output; F (+) Output. The series includes NIST-traceable calibration and comes complete with the mating connector and 59 kΩ shunt data.
액세서리
accessories
Environmentally protected connector with 6 female contacts, -55 to 125 °C (-67 to 257 °F) temperature range
76,043원 / 개당
521 재고 있음