한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
CDCN442-Controller
토로이달 전도도 분석기
재고가 있는 모델
- NEMA 4X (IP68) ケース
- 2 x 16 桁 LCD 表示
- 51 mm(2インチ)チューブまたはフラット面、またはパネル 144 x 144 x 100 mm DIN(5.7 x 5.7 x 4インチ)に組み立て可能
- シンプルな3キー操作
제품 개요
- セル定数 0.01、0.1、1または5/10 cm-1
- 導電率測定 10 mS/cmから1 S/cm
- データインターフェース RS485
- 表示タイプ 2×16桁LCD
- エンクロージャーの定格 IP68, NEMA タイプ 4X
- 周波数 50/60 Hz
- インピーダンス 600 Ω
- 材料 ABS、アルミニウム製
- リレーの数 2
- 動作温度(最高) 40 °C
- 動作温度(最低) 5 °C
- 出力詳細 4~20 mA(2)、レコーダー出力、制御出力(4~20 mA):P+I+D制御としてプログラム可能 光学的ガルバニック絶縁:2000 Vac
- 消費電力 3.5 VA
- プロセス温度(最高) 0 °C
- プロセス温度(最低) 130 °C
- リレーノート オン/オフアラーム出力 (2):NO (1A / 240 Vac)
- 抵抗率測定範囲 10 MΩ/cm~無限大
- 抵抗値の分解能 0.1 または 0.01
- シリーズID CDCN442-Controller
- 重量 1.3 kg
Supported Applications
The Omega CDCN442 Toroidal Conductivity Analyzer is designed for industrial process monitoring of conductivity and concentration. The series utilizes a toroidal (electrodeless) sensor with a PVDF (Kynar) body, intended for mounting on 2" tubes, flat surfaces, or panels.
Operating Conditions & Performance
The analyzer operates within an ambient temperature range of 5 thru 40 °C and relative humidity from 20 thru 80%. The sensor supports a process temperature of 0 thru 100°C at atmospheric pressure, with a maximum operating pressure rating of 10 Kgf/cm² (@ 25°C). Measurement capabilities include conductivity ranges of 5 thru 2000 mS/cm and a sensor range of 10 mS thru 2 S. The unit features automatic temperature compensation from 0 thru 200 °C (others upon request) and provides galvanic isolation of 2000 VAC via opto coupler.
Key Performance Specifications
- Conductivity Range: 5 thru 2000 mS/cm
- Sensor Range: 10 mS thru 2 S
- Temperature Compensation: 0 thru 200 °C (Others upon request)
- Power Consumption: 3.5 VA
- Load Resistance: 1KOhm
Configuration Options
The CDCN442 series offers configurable output signals and control options to suit specific process needs.
Outputs & Control
- Analog Output: 4 - 20 mA with adjustable output range.
- Digital Communication: RS485 bilateral via software, supporting up to 36 equipment units located up to 2 Km apart.
- Control Actuation: Frequency Modulation and P+Di (Proportional + Differential).
- Set-Point Configuration: 1 independent set-point from 0 thru 100% of scale.
- Relay Output: 1 control ON-OFF output.
Housing & Construction
- Enclosure Rating: IP-68
- Casing Material: Cast Aluminum SAE 323 (BASE) with ABS Frontal Lid, finished in Electrostatic Epoxy Paint.
- Sensor Body Material: PVDF (Kynar)
- Process Connection: Threaded Point 2" (CIP and others upon request).
- Cable Inlet: Cable knockout 3/8" (4x locations).
Included Accessories
The equipment is supplied with installation hardware (2x), an Instruction Manual, and SS Clamps with nuts and washers.
Key Product Differences
The CDCN442 series integrates the analyzer/transmitter functions within a single cast aluminum housing. The sensor insertion length is specified as 100mm. While the standard configuration supports conductivity measurement, concentration ranges are available upon consultation of specific lists not included in this documentation summary.
PDF 및 매뉴얼